Subtotal:
₦3,454,000
1.5KVA Hybrid Inverter + 1 X 12V 200AH Battery grid-tie Complete Installation
₦510,000
Related products
-
Inverter
2.5 KVA 24V Felicity Solar INVERTER
A solar inverter, or converter, or PV inverter converts the variable DC output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be an off-grid electrical network. It is a critical balance of system–components in a solar power system, allowing the use of ordinary AC-powered equipment.
SKU: n/a -
Advance Series Inverter, Hybrid Inverter, Inverter
A&E 15KVA HYBRID INVERTER
Smart LCD setting(Working modes, Charge Current, Charge voltage, etc.
Built-in MPPT solar charge controller 80A/100A/200A
MPPT efficiency max 98%
Powerful charge rate up to 140Amp
DC start &Automatic Self-Diagnostic Function
WIFI / USB monitoring function with free CD (wi-fi optional)
Supporting AGS, BTS port
Compatible to generatorSKU: n/a
Recently Viewed products
MPPT charge controller, SMK Inverter, Solar Charge Controller, Solar Products
MPPT Rilso Solar charge controller 12/24/48V Voc 150V 60A
MPPT charge controller, SMK Inverter, Solar Charge Controller, Solar Products
MPPT Rilso Solar charge controller 12/24/48V Voc 150V 60A
60A MPPT SOLAR CHARGE CONTROLLER
12V/24V/48V Auto work, parallel design，Multi-stage charging optimizes battery performance，MPPT efficiency >99.5%, Peak conversion efficiency 97.5%，Compatible with Gel. AGM. Flooded. Sealed lead-acid and Lithium battery, Comprehensive protection, Heatsink cooling, quiet operation，Comfortable installation and commissioning，Monitoring your solar harvest online via RS485 communication, Ethernet/RS232 communication Optional
SKU: n/a
MPPT charge controller, Solar Products
30A 12V/24V/48V Kartel solar charge controller MPPT
Features
Intelligent battery management function, extend battery life
Wide PV input voltage range, convenient for system configuration.
Multiple working modes to adapt different working occasion.
Advanced MPPT tracking, 99% tracking efficiency
SKU: n/a
Other Solar Products, Solar Fridge & Freezers, Solar Products
SOLAR FREEZER AC/DC 300L COMBO SOLUTION
Other Solar Products, Solar Fridge & Freezers, Solar Products
SOLAR FREEZER AC/DC 300L COMBO SOLUTION
1.Compressor fully enclosed, free of CFCS
2.CDC-free refrigerant
3 environmentally friendly.Rugged internal galvanized steel scratch-resistant
4.Easy to clean indoor aluminum
5.Lockable indoor light lid
6.Refrigeration speed, small size, low weight, smooth operation, low noise, long service life
SKU: n/a
Circuit Breaker, Solar Installation Accessories
DC Mini Circuit Breaker (Dc Mcb) -2P
FPV-63 DC MCB supplementary protectors are designed to provide overcurrent protection within appliances or electrical equipment, where a branch circuit protection is already provided or not required. Devices are designed for direct current (DC) control circuit applications.
Specifications
FPV-63 Series Circuit Breaker FPV-63
Frame Degree Rated Current (A) 63
Pole 2P
Rated Operating Voltage (V DC) DC12V -DC1200V Rated Current In (A) 1-63A
Rated Insulation Voltage Ui (V DC) 1200VDC Rated Impact Voltage Uimp (kV) 4
Ultimate Breaking Capacity Icu (kA) 6
Run Breaking Capacity LCS (%lcu) 75% Curve Type C
Trip Type Thermal-magnetic
SKU: n/a
Solar Products
Submersible DC Solar Water Pump + Inbuilt Controller
Submersible DC solar water pump is designed as DC brush motor driving pump impellers, by connecting to solar panels directly. The power from solar panels can drive this pump. This type of pump is mostly used in areas, where lack of electricity or strict requirement for environmental protection. DC solar pump is suitable to pump and drainage water, which doesn’t need a controller. Moreover, the installation is very simple. This type of pump is mainly used in homes, institutions, fields of power plants, steel mills, mining, chemical, fire, water plants, agricultural irrigation, and other industries. Specifications: Voltage: 24/36volts Power: 250watts Max flow: 2(M3/h) Max head: 25m Outlet: 1” Solar Panel capacity: 250/300watts – (24volt). Battery Capacity: 24volt Free installation Cable: 20m. Higher capacities are available on request.
SKU: n/a
Inverter
Lento Inverter 2.1KVA 24V Pure Sine Wave
Lento offers next generation smart MPPT based solar chargers for maximum efficiency and highest performance required in demanding situation. MPPT stands for maximum power point tracking and Lento’s smart MPPT solar chargers play a crucial, central role in stand alone and hybrid solar power installation. MPPT increases energy transfer efficiency by as much as 30% by calculating maximum voltage available from the SPV modules at which maximum power is available for charging and sets the charging current accordingly. Output from SPV modules can vary considerably according to changing weather conditions and incorporation of MPPT means the charging conditions are always optimized by covering extra voltage to amperes and thus speeding up the charging process. Lento uses high grade components to assure best performance and extended life of the unit.
Available Variants:
1450 VA / 24 VDC
2100 VA / 24 VDC
3.5 KVA / 48 VDC
5 KVA / 48 VDC & 96 VDC
7.5KVA / 120 VDC
10 KVA / 192 VDC
Product Description
Salient Features
Technical Documentation
Lento’s smart MPPT Solar chargers also play a dual role. The MPPT microprocessor and DSP based module constantly measures the load current on the battery and prevents deep discharge thereby extending battery life. In highly demanding SPV installations and where performance and efficiency are more critical the best solution is a maximum power point tracking (MPPT) based solar charger. Unlike the simple PWM MOSFET charge controller, MPPT solar chargers employ sophisticated microprocessor based circuitry with a wide number of variable presentable parameters and also automatic configuration. The end result is gain in efficiency by 30%, better battery performance and also enhanced battery life.
Lento Smart MPPT solar chargers are made of military grade components and undergo severe tests to withstand any climatic conditions. Lento smart MPPT solar chargers are designed for unattended operation for remote solar power installations and there are options available to configure the charge voltage and current according to the type of battery in use. The intelligent microprocessor based technology in MPPT solar chargers not only check for type of battery but also constantly monitor its condition and adjust charge accordingly. SPV modules are supposed to deliver 17 volts maximum but this is under optimum conditions and provided the glass surfaces are kept clean, which is not taken care of in remote conditions with the result that output voltage and current falls drastically. Lento MPPS solar chargers automatically factor in the reduced input and adjust output to ensure that charging of the battery and its state does not become affected.
In addition to the these basic features, Lento MPPT solar chargers incorporate automation and protection features that assure users of increased power, better battery life, consistently reliable performance and assured life.
SKU: n/a
Solar Products, Solar street light
100W All in one solar street light with camera
100w All In One Solar Street Light Outdoor For Smart City Public Lighting
P66 Waterproof Outdoor Security All in one model LED Solar Street Light, Long-term environmental lithium Batteries with overcharge and over discharge protection, more safe and reliable.
SKU: n/a
Advance Series Inverter, Inverter
Zektron 10kVA 192v Inverter ISH series
Zektron ISH series is a pure sine wave inverter with fully digital microprocessor control and a wider input voltage, this inverter is compatible with generators. With its transformer design, it can provide more protection to the load which is under unstable power condition.
SKU: n/a
UPS, ZEKTRON UPS
Delta 40kVA Transformer-based Online 3Phase UPS
Delta 300 DLT series UPS, PWM controlled, IGBT technology, microcontroller controlled, sinusoidal waveform, ONLINE Double Conversion topology and parallel configurable devices. Advanced communication system supports many communication protocols and brings remote control advantage of the UPS.
SKU: n/a
MPPT charge controller, Solar Products
100A/12V/24V/48V Kartel solar charge controller MPPT
Features
Intelligent battery management function, extend battery life
Wide PV input voltage range, convenient for system configuration.
Multiple working modes to adapt different working occasion.
Advanced MPPT tracking, 99% tracking efficiency
SKU: n/a
The main objective design of our off-grid energy system is to meet the desired electric load of the commercial & residential loads with high renewable fraction, low emissions and low cost of energy. The goal is to manage the energy consumption of the building, reduce the associated cost and to switch from grid-tied fossil fuel power system to an off-grid renewable and cleaner power system. Solar setup is a boon for both low electrified rural areas & also for a high consumer base in the urban cities.
| Solar Batteries | 12V/200AH x 1pcs |
| Inverter | 1.5kva X 1 pcs |
| Mounting Structure | For 1KW System |
| DC Junction Box | 1 pcs |
| Wires & Cables | Standard Pack |
| Protection Devices | As Required |
| Lighting Protection | 1 pcs |
2Kva 24V pure sine wave transformer Base Hybrid Inverter with an inbuilt 40A MPPT solar charge controller to maximize and regulate DC power from the solar array for charging the battery bank. The transformer-based design provides reliable power conversion in a compact size. Besides, it’s worry-free to start up motor-type loads such as refrigerators, motors, pumps, compressors, and laser printers as well as electronic loads like TVs, Computers, power tools, and battery chargers.
FAQ’s
Question 1. Is Installation provided with the system?
Ans: Yes Installation of complete setup is a provided for this product.
Question 2. What is the warranty on the product?
Ans: 2 Years on panels, 1 Year on the inverter, 1 Year on batteries, 2 Years on mounting structure & 2 Years on accessories.
Question 3. Are Post-installation services that are provided?
Ans: AMC can be availed, & paid service, repair & replacement could be facilitated.
Question 4. What optimum load should I run with this setup for 5Hrs backup?
Ans: 450W Constant running load for 10Hrs-12Hrs a day could be used for 5 Hrs backup Via Solar Power.
Question 5. Why a charge controller not in the combo?
Ans: The combo comes with a charge controller of 60A.
Question 6. Can I Use a MPPT charge controller?
Ans: Yes, you use the MPPT charge controller.
Question 7. How much electricity savings could it facilitate with this system monthly?
Ans: On average it saves 120 Kwh monthly, cutting common appliance’s load consumption.
Question 8. Can I run heavy inductive or capacitive load like AC with it?
Ans: It is recommended not to run such heavy load with small systems, all basic appliances like LED, Tube lights & fans are most suited.
Question 9. How much time would it take after booking for a complete installation?
Ans: It primarily depends upon the location of installation & complexity of the design, rest it should take a maximum of 3 days tentatively.
Question 10. Can I purchase only the components & get it installed locally.
Ans: Of course you can, on that case Installation cost will be removed from the price.
Question 11. Any additional charge that I will have to pay?
Ans: There is no additional charge as such you just need to pay the freight as actual.
