Zektron online UPS TS-11 series adopts online double conversion design and digital control technology and it features high input and output power factor (0.9). With ECO mode for energy-saving, intelligent battery management and excellent network management, it is a cost-effective power solution for your critical devices. When UPS is on battery mode, it can shut down unnecessary load and extend the backup time of the critical load.
SMK 2-1 YMC4 SOLAR CONNECTOR
₦3,000 ₦3,500
*Flexible leads make this type of branch connector more versatile than the none flexible type.
*Acc.to DIN V VDE V 0126-3/12.06,UL1703 standard.
Related products
-
Circuit Breaker, Solar Installation Accessories
Solar DC Fuse -32A
0 out of 5(0)A range of 10x38mm fuse links specifically designed for protecting photovoltaic strings. These fuse links are capable of interrupting low overcurrents associated with faulted photovoltaic string arrays
(reverse current, multi-array fault)Structural Characteristics
□ According to IEC60269-1
□ Rated current: 1-32A
□ Rated voltage: DC 1000V
□ Rated breaking capacity:DC 33kA
□ Operating class gPV for Solar protectionSpecification
Pole 1P
Rated Voltage Ue (V DC) 1000
Rated Current In (A) 1, 2, 3, 4, 5, 6, 8, 10, 12,15, 20, 25, 32
Biggest Block Ability(KA) 33
The Most High Power Consumption(W) 3.5SKU: n/a -
Battery rack, Solar Installation Accessories
Prag Battery Rack For 12V 200AH X 2 Gel Tubular
0 out of 5(0)Stylish design inverter batteries rack for Prag Tubular batteries. Strong, lightweight, compact design with attractive finishing to suit any environment. Easy to move around at a gross weight of 8kg, gives the right ventilation for your inverter batteries rather than placing them on stools and floors.
SKU: n/a
Recently Viewed products
SMK 4kva 800V 2 pole DC surge protective device

SMK 4kva 800V 2 pole DC surge protective device
A surge protector contains metal oxide varistor, or MOV, which diverts any extra voltage to ensure devices receive a consistent power level. The MOV works like a pressure-sensitive valve. When the MOV detects high voltage levels, it reduces resistance. If voltage levels are too low, it increases resistance
80A MPPT Solar Charger controller (12V- 48V)

80A MPPT Solar Charger controller (12V- 48V)
12V/24V36/48V Auto work,parallel design
Multi-stage charging optimizes battery performance
MPPT eficiency >99.5%, Peak conversion efficiency 97.5%
Compatible with Gel. AGM.Flooded. Sealed lead acid and Lithium battery
Comprehensive protection
Heatsink cooling, quiet operation
Comfortable installation and commissioning
Monitoring your solar harvest on line via RS485 communition, Ethernet/RS232 communication Optional
A&E 5KVA HYBRID INVERTER-High Frequency Off Grid Solar Inverter
Features:
Pure sine wave solar inverter
Output power factor 1
High PV input voltage range
Built-in 80A MPPT solar charger
Battery equalization function to optimize battery performance and extend lifecycle
Built-in anti-dusk kit for harsh environment
Subject | Product Detailed Information |
Type of appliance | PV Component Connector |
Model No. | PV-SN02/SY |
Rated Voltage (VDC) | 1000 |
Rated Impulse Voltage (V) | 8000 |
Rated Current (A) | 30A |
Pollution Degree (1/2/3/4) | 3 |
Overvoltage Category | III |
Low Ambient Temperature (°c) | -40°c |
Upper Ambient Temperature ( °c ) | 90 °c |
Enclosure Rating ( RTI and Flammability Class) | UL94-V0 |
Value Range of Cable Clamp | 5.5-6.3mm diameter for cable |
Rated Cross Section of Conductor | 2.5mm2 or 4mm2 |
Degree of Protection (IP Code) | IP67 |
Plug Power | 30N-80N |
Contact Material | Copper |
Insulation Material | PPO |
Authentication | TUV |
Wire length | 85mm or Arbitrary length |