Subject | Product Detailed Information |
Type of appliance | PV Component Connector |
Model No. | PV-SN02/SY |
Rated Voltage (VDC) | 1000 |
Rated Impulse Voltage (V) | 8000 |
Rated Current (A) | 30A |
Pollution Degree (1/2/3/4) | 3 |
Overvoltage Category | III |
Low Ambient Temperature (°c) | -40°c |
Upper Ambient Temperature ( °c ) | 90 °c |
Enclosure Rating ( RTI and Flammability Class) | UL94-V0 |
Value Range of Cable Clamp | 5.5-6.3mm diameter for cable |
Rated Cross Section of Conductor | 2.5mm2 or 4mm2 |
Degree of Protection (IP Code) | IP67 |
Plug Power | 30N-80N |
Contact Material | Copper |
Insulation Material | PPO |
Authentication | TUV |
Wire length | 85mm or Arbitrary length |
SMK 2-1 YMC4 SOLAR CONNECTOR
₦3,000 ₦3,500
*Flexible leads make this type of branch connector more versatile than the none flexible type.
*Acc.to DIN V VDE V 0126-3/12.06,UL1703 standard.
Related products
-
Circuit Breaker, Solar Installation Accessories
SMK 63A SINGLE POLE AC BREAKER 230/400V
0 out of 5(0)A range of 10x38mm fuse links specifically designed for protecting photovoltaic strings. These fuse links are capable of interrupting low overcurrents associated with faulted photovoltaic string arrays
(reverse current, multi-array fault)Structural Characteristics
□ According to IEC60269-1
□ Rated current: 1-32A
□ Rated voltage: DC 1000V
□ Rated breaking capacity:DC 33kA
□ Operating class gPV for Solar protectionSpecification
Pole 1P
Rated Voltage Ue (V DC) 1000
Rated Current In (A) 1, 2, 3, 4, 5, 6, 8, 10, 12,15, 20, 25, 32
Biggest Block Ability(KA) 33
The Most High Power Consumption(W) 3.5SKU: n/a -
MC4 connector, Solar Installation Accessories
2 in 1 MC4 Connectors for Panels Connection, 30 amps, Male, Female Pair
MC4 connector, Solar Installation Accessories2 in 1 MC4 Connectors for Panels Connection, 30 amps, Male, Female Pair
0 out of 5(0)Loom Solar Introduces 2 In 1 MC4 Connector for connecting solar panels.
- rated Voltage: 1500 volt, 30 amps
- suitable cable : 2.5 ~ 6.0 square mm
- TUV certified, IP 67. UV Protected
SKU: n/a
Recently Viewed products
Submersible DC Solar Water Pump + Inbuilt Controller
Submersible DC solar water pump is designed as DC brush motor driving pump impellers, by connecting to solar panels directly. The power from solar panels can drive this pump. This type of pump is mostly used in areas, where lack of electricity or strict requirement for environmental protection. DC solar pump is suitable to pump and drainage water, which doesn’t need a controller. Moreover, the installation is very simple. This type of pump is mainly used in homes, institutions, fields of power plants, steel mills, mining, chemical, fire, water plants, agricultural irrigation, and other industries. Specifications: Voltage: 24/36volts Power: 250watts Max flow: 2(M3/h) Max head: 25m Outlet: 1” Solar Panel capacity: 250/300watts – (24volt). Battery Capacity: 24volt Free installation Cable: 20m. Higher capacities are available on request.
SMK 4kva 800V 2 pole DC surge protective device

SMK 4kva 800V 2 pole DC surge protective device
A surge protector contains metal oxide varistor, or MOV, which diverts any extra voltage to ensure devices receive a consistent power level. The MOV works like a pressure-sensitive valve. When the MOV detects high voltage levels, it reduces resistance. If voltage levels are too low, it increases resistance
3.5KVA 3.5kW 24V Transformerless Hybrid Inverter with inbuilt 100A MPPT solar charger controller

3.5KVA 3.5kW 24V Transformerless Hybrid Inverter with inbuilt 100A MPPT solar charger controller
Features:
Input Voltage: 500Vdc Max
Output Voltage: 220V/230V; 110V/120V
Output Current: 60a
Output Frequency: 50/60hz
Output Type: Single, Triple
Size: 448*295*105
Type: DC/AC Inverters
Inverter Efficiency: 97%
Certificate: CE&EMC
Weight: 11KG
Solar charge controller: Built in 80A-100A MPPT
Power Factor: 1.0 (not 0.8)
Efficiency: over 93%
Waveform: Pure sine wave
Parallel operation: HHP-48 supports from 9/12 units
PV voltage range: 120-450VDC
Communication ways: USB/RS232/Dry contact
Monitoring ways: optional for NB-IOT/GPRS/WIFI
Operation Phase: Single phase (HHP48 supports 3 phase)
50kVA 3 phase vectronic stabilizer
Vectronic Stabilizers
Where to buy a vectronic stabilizer in Nigeria?
At DC Power Technologies, we sell, distribute and deliver different brands of stabilizers to our customers. If you need to get a stabilizer for your home or office in Nigeria, look no further than our technology company here at DC Power Technologies. We sell all types of home and office appliances that are highly useful, efficient and long lasting. Have you been wondering where to buy a vectronic stabilizer in Nigeria? Buy from us at DC Power Technologies now and get juicy deals.
What is the price of 5000W Stabilizer in Nigeria currently?
Looking to get a stabilizer of 5000W specification? This kind of stabilizer is available in stock in our store at DC Power Technologies. The price of a 5000W stabilizer in our store ranges from about ₦47,000 to as high as ₦70,000 depending on the specific brand you wish to buy.
Buy Stabilizer for fridge from DC Power Technologies
Many times, while using heavy appliances like fridges and air conditioners which use a lot of electricity voltage, you might need a stabilizer to protect such appliances from sudden power drops or surges. If you need a stabilizer for the fridge, look no further. We at DC Power Technologies, have different stabilizer brands that will work perfectly to protect your fridge from electric surges.
JORDY ELE 40KVA Servo Single Phase Central Industrial Stabilizer 80v-280v

JORDY ELE 40KVA Servo Single Phase Central Industrial Stabilizer 80v-280v
Low, High, Fluctuating NEPA Voltage? Now you can get your mind to rest rest with this heavy duty low cost high grade and high power Servo motorized Industrial stabilizer.
One Central Stabilizer for your entire Flat, Home, Office, etc.
Input Voltage 80v-280V)
Stabilize and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
JT-40kva Servo Automatic Voltage Stabilizer Series is based on digital technology; provides voltage stabilization and protection to appliances and equipment; designed as a central stabilizer to handle all house and industrial loads. \no need to worry for brown outs, burn outs and ertic power anymore.
Input voltage: 80V-280V AC
Power: 40kva
Technology: Servo Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 380V ± 10%
Phase: SINGLE
60A/12V/24V Kartel solar charge controller MPPT
Features
Intelligent battery management function, extend battery life
Wide PV input voltage range, convenient for system configuration.
Multiple working modes to adapt different working occasion.
Advanced MPPT tracking, 99% tracking efficiency
SOLAR FREEZER AC/DC 300L COMBO SOLUTION

SOLAR FREEZER AC/DC 300L COMBO SOLUTION
1.Compressor fully enclosed, free of CFCS
2.CDC-free refrigerant
3 environmentally friendly.Rugged internal galvanized steel scratch-resistant
4.Easy to clean indoor aluminum
5.Lockable indoor light lid
6.Refrigeration speed, small size, low weight, smooth operation, low noise, long service life
JORDY ELE 50KVA Servo 3phase Central Industrial Stabilizer

JORDY ELE 50KVA Servo 3phase Central Industrial Stabilizer
Low, High, Fluctuating NEPA Voltage? Now you can get your mind to rest with this heavy-duty low-cost high grade and high power Servo motorized Industrial stabilizer.
One Central Stabilizer for your entire Flat, Home, Office, etc.
Input Voltage (160V-450V)
Stabilize and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
PT-50kva Servo Automatic Voltage Stabilizer Series is based on digital technology; provides voltage stabilization and protection to appliances and equipment; designed as a central stabilizer to handle all house and industrial loads. \no need to worry about brownouts, burn outs and ertic power anymore.
Input voltage: 160V-460V AC
Power: 50KVA
Technology: Servo Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 380V ± 10%
Phase: Three
A&E 4KVA 48V PRO-Low Frequency Pure Sine Wave Inverter (TRANSFORMER BASE)

A&E 4KVA 48V PRO-Low Frequency Pure Sine Wave Inverter (TRANSFORMER BASE)
LCD display , easy to read how inverter operates on LCD screen
Compatible to generator
5-levels DIP switch , offering customized performance
9-levels battery selector , Enable to charge Li-thium , Gel , lead-acid battery
DC(Solar)/AC prority optional
4 levels charge current adjustable
With RS232 communication port
With BTS & GTS , optimazing battery performance & start generator automatically
Power saver Switch , Enable to minimize standby consumption.