Subject | Product Detailed Information |
Type of appliance | PV Component Connector |
Model No. | PV-SN02/SY |
Rated Voltage (VDC) | 1000 |
Rated Impulse Voltage (V) | 8000 |
Rated Current (A) | 30A |
Pollution Degree (1/2/3/4) | 3 |
Overvoltage Category | III |
Low Ambient Temperature (°c) | -40°c |
Upper Ambient Temperature ( °c ) | 90 °c |
Enclosure Rating ( RTI and Flammability Class) | UL94-V0 |
Value Range of Cable Clamp | 5.5-6.3mm diameter for cable |
Rated Cross Section of Conductor | 2.5mm2 or 4mm2 |
Degree of Protection (IP Code) | IP67 |
Plug Power | 30N-80N |
Contact Material | Copper |
Insulation Material | PPO |
Authentication | TUV |
Wire length | 85mm or Arbitrary length |
SMK 2-1 YMC4 SOLAR CONNECTOR
₦3,000 ₦3,500
*Flexible leads make this type of branch connector more versatile than the none flexible type.
*Acc.to DIN V VDE V 0126-3/12.06,UL1703 standard.
Related products
-
Circuit Breaker, Solar Installation Accessories
SMK 63A SINGLE POLE AC BREAKER 230/400V
0 out of 5(0)A range of 10x38mm fuse links specifically designed for protecting photovoltaic strings. These fuse links are capable of interrupting low overcurrents associated with faulted photovoltaic string arrays
(reverse current, multi-array fault)Structural Characteristics
□ According to IEC60269-1
□ Rated current: 1-32A
□ Rated voltage: DC 1000V
□ Rated breaking capacity:DC 33kA
□ Operating class gPV for Solar protectionSpecification
Pole 1P
Rated Voltage Ue (V DC) 1000
Rated Current In (A) 1, 2, 3, 4, 5, 6, 8, 10, 12,15, 20, 25, 32
Biggest Block Ability(KA) 33
The Most High Power Consumption(W) 3.5SKU: n/a -
Battery rack, Solar Installation Accessories
Prag Battery Rack For 12V 200AH X 2 Gel Tubular
0 out of 5(0)Stylish design inverter batteries rack for Prag Tubular batteries. Strong, lightweight, compact design with attractive finishing to suit any environment. Easy to move around at a gross weight of 8kg, gives the right ventilation for your inverter batteries rather than placing them on stools and floors.
SKU: n/a
Recently Viewed products
30A 12V/24V/48V Kartel solar charge controller MPPT
Features
Intelligent battery management function, extend battery life
Wide PV input voltage range, convenient for system configuration.
Multiple working modes to adapt different working occasion.
Advanced MPPT tracking, 99% tracking efficiency
3.5KVA 3.5kW 24V Transformerless Hybrid Inverter with inbuilt 100A MPPT solar charger controller

3.5KVA 3.5kW 24V Transformerless Hybrid Inverter with inbuilt 100A MPPT solar charger controller
Features:
Input Voltage: 500Vdc Max
Output Voltage: 220V/230V; 110V/120V
Output Current: 60a
Output Frequency: 50/60hz
Output Type: Single, Triple
Size: 448*295*105
Type: DC/AC Inverters
Inverter Efficiency: 97%
Certificate: CE&EMC
Weight: 11KG
Solar charge controller: Built in 80A-100A MPPT
Power Factor: 1.0 (not 0.8)
Efficiency: over 93%
Waveform: Pure sine wave
Parallel operation: HHP-48 supports from 9/12 units
PV voltage range: 120-450VDC
Communication ways: USB/RS232/Dry contact
Monitoring ways: optional for NB-IOT/GPRS/WIFI
Operation Phase: Single phase (HHP48 supports 3 phase)
SMK 2-1 YMC4 SOLAR CONNECTOR
*Flexible leads make this type of branch connector more versatile than the none flexible type.
*Acc.to DIN V VDE V 0126-3/12.06,UL1703 standard.
5KVA 24V Felicity Solar INVERTER
A solar inverter, or converter, or PV inverter converts the variable DC output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be an off-grid electrical network. It is a critical balance of system–components in a solar power system, allowing the use of ordinary AC-powered equipment.
SOLAR FREEZER AC/DC 300L COMBO SOLUTION

SOLAR FREEZER AC/DC 300L COMBO SOLUTION
1.Compressor fully enclosed, free of CFCS
2.CDC-free refrigerant
3 environmentally friendly.Rugged internal galvanized steel scratch-resistant
4.Easy to clean indoor aluminum
5.Lockable indoor light lid
6.Refrigeration speed, small size, low weight, smooth operation, low noise, long service life