Model | SCH-30A-H | SCH-40A-H |
Solar System Voltage | 12V/24V/36V/48V Auto work | |
Electrical | ||
PV Operating Voltage | 18~150Vdc@12V 35~150Vdc@24V 50~150Vdc@36V 60~150Vdc@48V | |
Max. PV input power | 12V 400W | 12V 600W |
24V 800W | 24V 1200W | |
36V 1300W | 36V 1700W | |
48V 1700W | 48V 2300W | |
Rated input current | 30A | 40A |
Rated DC load current | 40A | |
Self consumption | 2W | |
Max.Conversion Efficiency | 97.5% | |
Protection | PV array short circuit, over charging,battery reverse polarity,output short circuit | |
Battery charging | ||
Battery Type | Sealed Gel AGM Flooded Lithium Battery | |
Charge algorithm | 4 stage: Bulk, Absorption, Float, Equalize charging | |
Bulk charge voltage | Sealed: 14.4V AGM 14.2V Gel:14.2V Flooded:14.6V User defined:10-15V | |
Float charge voltage | Sealed/Gel/AGM:13.8V Flooded:13.7V User defined:10-15V | |
Equalize charge voltage | Sealed 14.6V AGM:14.8V Flooded:14.9V | |
Load disconnect voltage | 10.5V ~12V Adjustable | |
Low voltage reconnect voltage | 12.5V | |
Temperature compensation | 5MV/℃/2V with BTS | |
Communication | ||
Communication Port | RS485(Standard) Ethernet RS232 Optional with On line monitoring system | |
Physical | ||
Net weight | 3.3kg | |
Gross weight | 3.7kg | |
Dimension | 350*280*180MM | |
Cooling | Heatsink cooling | |
Enclosure | IP54 | |
Environment | ||
Ambient operating temperature | -25℃~60℃ | |
Storage Temperature | -40℃~80℃ | |
Humidity | 100% non-condensing | |
Warranty | One years |
30A 12/24V Voc 18-100V MPPT Charge Controller
₦38,000
Related products
Recently Viewed products
30A 12V/24V Kartel solar charge controller MPPT
Features
Intelligent battery management function, extend battery life
Wide PV input voltage range, convenient for system configuration.
Multiple working modes to adapt different working occasion.
Advanced MPPT tracking, 99% tracking efficiency
A&E 10KVA HYBRID INVERTER
Smart LCD setting(Working modes, Charge Current, Charge voltage, etc.
Built-in MPPT solar charge controller 80A/100A/200A
MPPT efficiency max 98%
Powerful charge rate up to 140Amp
DC start &Automatic Self-Diagnostic Function
WIFI / USB monitoring function with free CD (wi-fi optional)
Supporting AGS, BTS port
Compatible to generator
SMK 4kva 800V 2 pole DC surge protective device

SMK 4kva 800V 2 pole DC surge protective device
A surge protector contains metal oxide varistor, or MOV, which diverts any extra voltage to ensure devices receive a consistent power level. The MOV works like a pressure-sensitive valve. When the MOV detects high voltage levels, it reduces resistance. If voltage levels are too low, it increases resistance
Submersible DC Solar Water Pump + Inbuilt Controller
Submersible DC solar water pump is designed as DC brush motor driving pump impellers, by connecting to solar panels directly. The power from solar panels can drive this pump. This type of pump is mostly used in areas, where lack of electricity or strict requirement for environmental protection. DC solar pump is suitable to pump and drainage water, which doesn’t need a controller. Moreover, the installation is very simple. This type of pump is mainly used in homes, institutions, fields of power plants, steel mills, mining, chemical, fire, water plants, agricultural irrigation, and other industries. Specifications: Voltage: 24/36volts Power: 250watts Max flow: 2(M3/h) Max head: 25m Outlet: 1” Solar Panel capacity: 250/300watts – (24volt). Battery Capacity: 24volt Free installation Cable: 20m. Higher capacities are available on request.