1 × ₦275,000
Subtotal:
₦9,305,000
APC Back-UPS 700VA – BX700UI
₦40,500
APC Back-UPS 700VA, 230V, AVR, IEC Sockets
Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.Telephone dataline surge protectionProvides protection of connected equipment from power surges traveling on telephone lines.USB connectionUse your PC to access additional power protection and management features for your UPS via a USB Port.
Related products
-
UPS
APC SMART UPS SRT5KXLI 5000VA 230V
Output
OUTPUT POWER CAPACITY
4500 Watts / 5000 VA
MAX CONFIGURABLE POWER (WATTS)
4500 Watts / 5000 VA
NOMINAL OUTPUT VOLTAGE
230V
OUTPUT VOLTAGE DISTORTION
Less than 2%
OUTPUT FREQUENCY (SYNC TO MAINS)
50/60Hz +/- 3 Hz
OTHER OUTPUT VOLTAGES
220, 240V
CREST FACTOR
3 : 1
Double Conversion Online
WAVEFORM TYPE
Sine wave
OUTPUT CONNECTIONS
(2) IEC Jumpers (Battery Backup) , (4) IEC 320 C19 (Battery Backup) , (6) IEC 320 C13 (Battery Backup)
BYPASS
Internal Bypass (Automatic and Manual)
Input
NOMINAL INPUT VOLTAGE
230V
INPUT FREQUENCY
40 – 70 Hz (auto sensing)
INPUT CONNECTIONS
Hard Wire 3 wire (1PH+N+G)
INPUT VOLTAGE RANGE FOR MAIN OPERATIONS
160 – 275 V
INPUT VOLTAGE ADJUSTABLE RANGE FOR MAINS OPERATION
100 – 275 (half load)V
OTHER INPUT VOLTAGES
220 , 240
Batteries & Runtime
BATTERY TYPE
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
INCLUDED BATTERY MODULES
2
TYPICAL RECHARGE TIME
1.5 hour(s)
REPLACEMENT BATTERY
APCRBC140
RBC QUANTITY
1
NOMINAL BATTERY VOLTAGE
192V
Communications & Management
INTERFACE PORT(S)
RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB
AVAILABLE SMARTSLOT™ INTERFACE QUANTITY
1
CONTROL PANEL
Multi-function LCD status and control console
AUDIBLE ALARM
Audible and visible alarms prioritized by severity
EMERGENCY POWER OFF (EPO)
Yes
Surge Protection and Filtering
SURGE ENERGY RATING
480 Joules
Physical
MAXIMUM HEIGHT
432.0 mm
MAXIMUM WIDTH
130.0 mm
MAXIMUM DEPTH
720.0 mm
NET WEIGHT
54.43 kg
SHIPPING WEIGHT
63.6 kg
SHIPPING HEIGHT
330.0 mm
SHIPPING WIDTH
610.0 mm
SHIPPING DEPTH
960.0 mm
COLOR
Black
UNITS PER PALLET
6.0
Environmental
OPERATING ENVIRONMENT
0 – 40 °C
OPERATING RELATIVE HUMIDITY
0 – 95% non-condensing %
OPERATING ELEVATION
0-3000 meters
STORAGE TEMPERATURE
-15 – 45 °C
STORAGE RELATIVE HUMIDITY
0 – 95% non-condensing %
STORAGE ELEVATION
0-15000 meters
AUDIBLE NOISE AT 1 METER FROM SURFACE OF UNIT
55.000 dB
ONLINE THERMAL DISSIPATION
931.000 BTU/hr
PROTECTION CLASS
IP 20
Conformance
APPROVALS
CE , CE Mark , EAC , EN/IEC 62040-1 , EN/IEC 62040-2 , IRAM , RCM , VDE
STANDARD WARRANTY
3 years repair or replace (excluding battery) and 2 years for battery
Sustainable Offer Status
ROHS
Compliant
REACH
REACH: Contains No SVHCsSKU: n/a -
UPS
APC APRBC 140 UPS Replacement Battery Catridge For Select Smart-UPS
Genuine APC replacement battery cartridges (RBC) are tested and certified for compatibility to restore UPS performance to specification
Includes all required connectors, Battery recycling guide, Installation guide, Reusable packagingSKU: n/a
Recently Viewed products
MPPT charge controller, Solar Products
100A/192V Kartel solar charge controller MPPT
Features
Intelligent battery management function, extend battery life
Wide PV input voltage range, convenient for system configuration.
Multiple working modes to adapt different working occasion.
Advanced MPPT tracking, 99% tracking efficiency
SKU: n/a
Felicity Inverter, Inverter
7.5KVA 48V Pure sine wave inverter with 120A MPPT
A solar inverter, or converter, or PV inverter converts the variable DC output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be an off-grid electrical network. It is a critical balance of system–components in a solar power system, allowing the use of ordinary AC-powered equipment.
SKU: n/a
Apc Ups, UPS
APC Smart-UPS SRT 6000VA 230V – SRT6KXLI
Specification:
Output Power Capacity: 2700 Watts / 3000 VA
Max Configurable Power: 2700 Watts / 3000 VA
Nominal Output Voltage: 230V
Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
Efficiency at Full Load: 95.0%
Output Voltage Distortion: Less than 5% at full load
Output Frequency (sync to mains): 47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal
Topology: Line Interactive
Waveform Type: Sine wave
Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time: 3 hour(s)
Replacement Battery: RBC55
SKU: n/a
MPPT charge controller, Solar Charge Controller, Solar Products
100A MPPT Solar Charger controller (12V- 48V)
MPPT charge controller, Solar Charge Controller, Solar Products
100A MPPT Solar Charger controller (12V- 48V)
12V/24V36/48V Auto work,parallel design
Multi-stage charging optimizes battery performance
MPPT eficiency >99.5%, Peak conversion efficiency 97.5%
Compatible with Gel. AGM.Flooded. Sealed lead acid and Lithium battery
Comprehensive protection
Heatsink cooling, quiet operation
Comfortable installation and commissioning
Monitoring your solar harvest on line via RS485 communition, Ethernet/RS232 communication Optional
SKU: n/a
UPS, ZEKTRON UPS
Delta 40kVA Transformer-based Online 3Phase UPS
Delta 300 DLT series UPS, PWM controlled, IGBT technology, microcontroller controlled, sinusoidal waveform, ONLINE Double Conversion topology and parallel configurable devices. Advanced communication system supports many communication protocols and brings remote control advantage of the UPS.
SKU: n/a
Inverter
Lento 3KVA 48V Pure Sine Wave Inverter
Lento offers next-generation smart MPPT based solar chargers for maximum efficiency and the highest performance required in demanding situations. MPPT stands for maximum power point tracking and Lento’s smart MPPT solar chargers play a crucial, central role in stand-alone and hybrid solar power installation. MPPT increases energy transfer efficiency by as much as 30% by calculating the maximum voltage available from the SPV modules at which maximum power is available for charging and sets the charging current accordingly. Output from SPV modules can vary considerably according to changing weather conditions and incorporation of MPPT means the charging conditions are always optimized by covering extra voltage to amperes and thus speeding up the charging process. Lento uses high-grade components to assure the best performance and extended life of the unit.
Available Variants:
1450 VA / 24 VDC
2100 VA / 24 VDC
3.5 KVA / 48 VDC
5 KVA / 48 VDC & 96 VDC
7.5KVA / 120 VDC
10 KVA / 192 VDC
Product Description
Salient Features
Technical Documentation
Lento’s smart MPPT Solar chargers also play a dual role. The MPPT microprocessor and DSP-based module constantly measures the load current on the battery and prevents deep discharge thereby extending battery life. In highly demanding SPV installations and where performance and efficiency are more critical, the best solution is a maximum power point tracking (MPPT) based solar charger. Unlike the simple PWM MOSFET charge controller, MPPT solar chargers employ sophisticated microprocessor-based circuitry with a wide number of variable presentable parameters and also automatic configuration. The end result is a gain in efficiency by 30%, better battery performance, and also enhanced battery life.
Lento Smart MPPT solar chargers are made of military-grade components and undergo severe tests to withstand any climatic conditions. Lento smart MPPT solar chargers are designed for unattended operation for remote solar power installations and there are options available to configure the charge voltage and current according to the type of battery in use. The intelligent microprocessor-based technology in MPPT solar chargers not only check for the type of battery but also constantly monitor its condition and adjust the charge accordingly. SPV modules are supposed to deliver 17 volts maximum but this is under optimum conditions and provided the glass surfaces are kept clean, which is not taken care of in remote conditions with the result that output voltage and the current falls drastically. Lento MPPS solar chargers automatically factor in the reduced input and adjust output to ensure that the charging of the battery and its state does not become affected.
In addition to these basic features, Lento MPPT solar chargers incorporate automation and protection features that assure users of increased power, better battery life, consistently reliable performance, and assured life.
SKU: n/a
Inverter, Kartel Inverter
30kVA/192V 3 PHASE HDSX SERIES INVERTER
HDSX Inverter
15KVA – 50KVA
The HDSX series Inverter is packed with powerful features such as pure sine wave output, intelligent LCD integration display and an added fault query function, which makes its operation easy to monitor in real time.
The HDSX Series higher KVA solutions offer high quality and reliable power back-up solutions for running such loads, meeting such needs and handling such equipment
SKU: n/a
Key Features
- LED status displayQuickly understand unit and power status with visual indicators.
- Audible alarmsProvides notification of changing utility power and UPS power conditions
- Safety-agency approved
- Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Battery-protected and surge-only outlets
- Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
- Intelligent battery managementMaximizes battery performance, life, and reliability through intelligent, precision charging.
- Battery failure notificationProvides early-warning fault analysis on batteries enabling timely preventive maintenance
- Automatic self-testPeriodic battery self-test ensures early detection of a battery that needs to be replaced.
