Delta 300 DLT series UPS, PWM controlled, IGBT technology, microcontroller controlled, sinusoidal waveform, ONLINE Double Conversion topology and parallel configurable devices. Advanced communication system supports many communication protocols and brings remote control advantage of the UPS.
APC Smart-UPS SRT 6000VA 230V – SRT6KXLI
₦1,204,500
Specification:
- Output Power Capacity: 2700 Watts / 3000 VA
- Max Configurable Power: 2700 Watts / 3000 VA
- Nominal Output Voltage: 230V
- Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
- Efficiency at Full Load: 95.0%
- Output Voltage Distortion: Less than 5% at full load
- Output Frequency (sync to mains): 47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal
- Topology: Line Interactive
- Waveform Type: Sine wave
- Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 3 hour(s)
- Replacement Battery: RBC55
Related products
-
UPS
BLUE GATE BLUE GATE – 650KVA UPS
0 out of 5(0)Blue Gate UPS (BG 650VA) Wide input voltage window, Boost and buck AVR, Cold start function, Intelligent CPU control Model ID: BG-1200 Model Name: UPS Type: Line-interac.. Features: Automatic Vo.. Maximum Voltage Power: 230V Output Power: 720W UPS Auto On When AC Recovery Led Status Alarm Low Battery Alarm AVR Overload And Short Circuit Protection Extremely rugged
Key Features- Durable
- Superior Quality
- Affordable
SKU: n/a -
UPS
APC SMART UPS SRT5KXLI 5000VA 230V
0 out of 5(0)Output
OUTPUT POWER CAPACITY
4500 Watts / 5000 VA
MAX CONFIGURABLE POWER (WATTS)
4500 Watts / 5000 VA
NOMINAL OUTPUT VOLTAGE
230V
OUTPUT VOLTAGE DISTORTION
Less than 2%
OUTPUT FREQUENCY (SYNC TO MAINS)
50/60Hz +/- 3 Hz
OTHER OUTPUT VOLTAGES
220, 240V
CREST FACTOR
3 : 1
Double Conversion Online
WAVEFORM TYPE
Sine wave
OUTPUT CONNECTIONS
(2) IEC Jumpers (Battery Backup) , (4) IEC 320 C19 (Battery Backup) , (6) IEC 320 C13 (Battery Backup)
BYPASS
Internal Bypass (Automatic and Manual)
Input
NOMINAL INPUT VOLTAGE
230V
INPUT FREQUENCY
40 – 70 Hz (auto sensing)
INPUT CONNECTIONS
Hard Wire 3 wire (1PH+N+G)
INPUT VOLTAGE RANGE FOR MAIN OPERATIONS
160 – 275 V
INPUT VOLTAGE ADJUSTABLE RANGE FOR MAINS OPERATION
100 – 275 (half load)V
OTHER INPUT VOLTAGES
220 , 240
Batteries & Runtime
BATTERY TYPE
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
INCLUDED BATTERY MODULES
2
TYPICAL RECHARGE TIME
1.5 hour(s)
REPLACEMENT BATTERY
APCRBC140
RBC QUANTITY
1
NOMINAL BATTERY VOLTAGE
192V
Communications & Management
INTERFACE PORT(S)
RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB
AVAILABLE SMARTSLOT™ INTERFACE QUANTITY
1
CONTROL PANEL
Multi-function LCD status and control console
AUDIBLE ALARM
Audible and visible alarms prioritized by severity
EMERGENCY POWER OFF (EPO)
Yes
Surge Protection and Filtering
SURGE ENERGY RATING
480 Joules
Physical
MAXIMUM HEIGHT
432.0 mm
MAXIMUM WIDTH
130.0 mm
MAXIMUM DEPTH
720.0 mm
NET WEIGHT
54.43 kg
SHIPPING WEIGHT
63.6 kg
SHIPPING HEIGHT
330.0 mm
SHIPPING WIDTH
610.0 mm
SHIPPING DEPTH
960.0 mm
COLOR
Black
UNITS PER PALLET
6.0
Environmental
OPERATING ENVIRONMENT
0 – 40 °C
OPERATING RELATIVE HUMIDITY
0 – 95% non-condensing %
OPERATING ELEVATION
0-3000 meters
STORAGE TEMPERATURE
-15 – 45 °C
STORAGE RELATIVE HUMIDITY
0 – 95% non-condensing %
STORAGE ELEVATION
0-15000 meters
AUDIBLE NOISE AT 1 METER FROM SURFACE OF UNIT
55.000 dB
ONLINE THERMAL DISSIPATION
931.000 BTU/hr
PROTECTION CLASS
IP 20
Conformance
APPROVALS
CE , CE Mark , EAC , EN/IEC 62040-1 , EN/IEC 62040-2 , IRAM , RCM , VDE
STANDARD WARRANTY
3 years repair or replace (excluding battery) and 2 years for battery
Sustainable Offer Status
ROHS
Compliant
REACH
REACH: Contains No SVHCsSKU: n/a
Recently Viewed products
Felicity Solar 2.5VA 24V Pure sine wave Inverter
Solar inverter, or converter, or PV inverter converts the variable DC output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be off-grid electrical network. It is a critical balance of system–component in a solar power system, allowing the use of ordinary AC-powered equipment.
APC Back-UPS 700VA – BX700UI
APC Back-UPS 700VA, 230V, AVR, IEC Sockets
Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.Telephone dataline surge protectionProvides protection of connected equipment from power surges traveling on telephone lines.USB connectionUse your PC to access additional power protection and management features for your UPS via a USB Port.
1200VA (1.2KVA) Blue Gate UPS – Bluegate Uninterruptible Power Supply
Solar Home DC System Kit, 3.7V 4000mah Lithium Battery
*Model: 6V 6W
*Solar Cell: polycrystalline silicon
*Dimension: 29×19.5×1.8cm
*Output wire: 3m
*Frame Color: yellow, Green or Blue
*Application Range: Charge 3V-5V batteries
*Water-proof: IPX6
Lento 3KVA 48V Pure Sine Wave Inverter
Lento offers next-generation smart MPPT based solar chargers for maximum efficiency and the highest performance required in demanding situations. MPPT stands for maximum power point tracking and Lento’s smart MPPT solar chargers play a crucial, central role in stand-alone and hybrid solar power installation. MPPT increases energy transfer efficiency by as much as 30% by calculating the maximum voltage available from the SPV modules at which maximum power is available for charging and sets the charging current accordingly. Output from SPV modules can vary considerably according to changing weather conditions and incorporation of MPPT means the charging conditions are always optimized by covering extra voltage to amperes and thus speeding up the charging process. Lento uses high-grade components to assure the best performance and extended life of the unit.
Available Variants:
1450 VA / 24 VDC
2100 VA / 24 VDC
3.5 KVA / 48 VDC
5 KVA / 48 VDC & 96 VDC
7.5KVA / 120 VDC
10 KVA / 192 VDC
Product Description
Salient Features
Technical Documentation
Lento’s smart MPPT Solar chargers also play a dual role. The MPPT microprocessor and DSP-based module constantly measures the load current on the battery and prevents deep discharge thereby extending battery life. In highly demanding SPV installations and where performance and efficiency are more critical, the best solution is a maximum power point tracking (MPPT) based solar charger. Unlike the simple PWM MOSFET charge controller, MPPT solar chargers employ sophisticated microprocessor-based circuitry with a wide number of variable presentable parameters and also automatic configuration. The end result is a gain in efficiency by 30%, better battery performance, and also enhanced battery life.
Lento Smart MPPT solar chargers are made of military-grade components and undergo severe tests to withstand any climatic conditions. Lento smart MPPT solar chargers are designed for unattended operation for remote solar power installations and there are options available to configure the charge voltage and current according to the type of battery in use. The intelligent microprocessor-based technology in MPPT solar chargers not only check for the type of battery but also constantly monitor its condition and adjust the charge accordingly. SPV modules are supposed to deliver 17 volts maximum but this is under optimum conditions and provided the glass surfaces are kept clean, which is not taken care of in remote conditions with the result that output voltage and the current falls drastically. Lento MPPS solar chargers automatically factor in the reduced input and adjust output to ensure that the charging of the battery and its state does not become affected.
In addition to these basic features, Lento MPPT solar chargers incorporate automation and protection features that assure users of increased power, better battery life, consistently reliable performance, and assured life.
Max 20kva Single-phase Servo stabilizer (90v-260V)

Max 20kva Single-phase Servo stabilizer (90v-260V)
Max 20KVA Servo Stabilizer (90v-260v)
Max 20kva Single-phase Servo stabilizer (90v-260V) will protect all the electrical appliances both in your home and office.
This servo stabilizer comes with a wild range of input voltage from 90v-260v and a constant input of 220 volts, thus providing a stabilizer voltage supply and protecting all electrical appliances in your premises, both your home and offices, this includes Electronics, Fridge, and freezer, Smart TV, home theater, Air Condition, Satellite Decoder, washing machine, fans, etc.
Max stabilizers are of the best quality and Affordable stabilizer in Nigeria and West Africa, 20KVA servo stabilizer is based on digital technology that provides good protection and wonderful stabilization to all your Electrical Appliance both in your home and offices.
Max 20KVA servo stabilizer is designed as a central stabilizer to protect all house and offices equipment.
This 20KVA servo stabilizer can handle all inductive loads such as washing machines, air-condition, vacuum cleaners, etc.
This 20KVA SERVO stabilizer is built with the modern technology of special transformer of servo technology and it comes with digital control technology.
Features
APPLICATION
20kva Servo stabilizer
APC Smart-UPS SRT 6000VA 230V – SRT6KXLI
Specification:
A&E 5KVA HYBRID INVERTER-High Frequency Off Grid Solar Inverter
Features:
Pure sine wave solar inverter
Output power factor 1
High PV input voltage range
Built-in 80A MPPT solar charger
Battery equalization function to optimize battery performance and extend lifecycle
Built-in anti-dusk kit for harsh environment
APC Smart-UPS SRT is a family of high-density, performance UPSs for voice and data networks, medical labs, and light industrial applications. Capable of supporting 10kVA in a 6U rack/tower convertible form, users can support power hungry blade servers or heavily loaded equipment racks. This flexible form factor allows standardization across multiple applications. High power internal chargers allow virtually unlimited additional matching battery packs to comply with aggressive runtime demands of business-critical systems. Customers with harsh power environments looking for extremely tight voltage and frequency regulation, internal bypass, and input power factor correction typical of double conversion online topology will get them in the Smart-UPS RT.
Specification:
- Max Configurable Power: 6000 Watts / 6000 VA
- Nominal Output Voltage: 230V
- Output Voltage Distortion: Less than 2%
- Output Frequency (sync to mains): 50/60Hz /- 3 Hz
- Other Output Voltages: 220, 240
- Crest Factor: 3 : 1
- Topology: Double Conversion Online
- Waveform Type: Sine wave
- Nominal Input Voltage: 230V
- Input Frequency: 40 – 70 Hz (auto sensing)
- Input Connections: Hard Wire 3 wire (1PH N G)
- Input voltage range for main operations: 160 – 275V
- Control panel: Multi-function LCD status and control console
- Audible Alarm: Audible and visible alarms prioritized by severity
- Emergency Power Off (EPO): Yes