Delta 300 DLT series UPS, PWM controlled, IGBT technology, microcontroller controlled, sinusoidal waveform, ONLINE Double Conversion topology and parallel configurable devices. Advanced communication system supports many communication protocols and brings remote control advantage of the UPS.
APC Smart-UPS SRT2200XLI SRT 2200VA 230V
₦450,000
Related products
-
UPS
Maxtron UPS – 650VA
0 out of 5(0)Maxtron UPS possesses Boost and Trim Automatic Voltage Regulation (AVR). It gives higher application availability by correcting low and high voltage conditions without using the battery. Intelligent battery management, maximizes battery performance, life, and reliability through intelligent, precision charging.
SKU: n/a -
UPS
APC APRBC 140 UPS Replacement Battery Catridge For Select Smart-UPS
0 out of 5(0)Genuine APC replacement battery cartridges (RBC) are tested and certified for compatibility to restore UPS performance to specification
Includes all required connectors, Battery recycling guide, Installation guide, Reusable packagingSKU: n/a
Recently Viewed products
3.5KVA 3.5kW 24V Transformerless Hybrid Inverter with inbuilt 100A MPPT solar charger controller

3.5KVA 3.5kW 24V Transformerless Hybrid Inverter with inbuilt 100A MPPT solar charger controller
Features:
Input Voltage: 500Vdc Max
Output Voltage: 220V/230V; 110V/120V
Output Current: 60a
Output Frequency: 50/60hz
Output Type: Single, Triple
Size: 448*295*105
Type: DC/AC Inverters
Inverter Efficiency: 97%
Certificate: CE&EMC
Weight: 11KG
Solar charge controller: Built in 80A-100A MPPT
Power Factor: 1.0 (not 0.8)
Efficiency: over 93%
Waveform: Pure sine wave
Parallel operation: HHP-48 supports from 9/12 units
PV voltage range: 120-450VDC
Communication ways: USB/RS232/Dry contact
Monitoring ways: optional for NB-IOT/GPRS/WIFI
Operation Phase: Single phase (HHP48 supports 3 phase)
Felicity Solar 2.5VA 24V Pure sine wave Inverter
Solar inverter, or converter, or PV inverter converts the variable DC output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be off-grid electrical network. It is a critical balance of system–component in a solar power system, allowing the use of ordinary AC-powered equipment.
APC Back-UPS 700VA – BX700UI
APC Back-UPS 700VA, 230V, AVR, IEC Sockets
Automatic Voltage Regulation (AVR)Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.Telephone dataline surge protectionProvides protection of connected equipment from power surges traveling on telephone lines.USB connectionUse your PC to access additional power protection and management features for your UPS via a USB Port.
1200VA (1.2KVA) Blue Gate UPS – Bluegate Uninterruptible Power Supply
Solar Home DC System Kit, 3.7V 4000mah Lithium Battery
*Model: 6V 6W
*Solar Cell: polycrystalline silicon
*Dimension: 29×19.5×1.8cm
*Output wire: 3m
*Frame Color: yellow, Green or Blue
*Application Range: Charge 3V-5V batteries
*Water-proof: IPX6
Lento 3KVA 48V Pure Sine Wave Inverter
Lento offers next-generation smart MPPT based solar chargers for maximum efficiency and the highest performance required in demanding situations. MPPT stands for maximum power point tracking and Lento’s smart MPPT solar chargers play a crucial, central role in stand-alone and hybrid solar power installation. MPPT increases energy transfer efficiency by as much as 30% by calculating the maximum voltage available from the SPV modules at which maximum power is available for charging and sets the charging current accordingly. Output from SPV modules can vary considerably according to changing weather conditions and incorporation of MPPT means the charging conditions are always optimized by covering extra voltage to amperes and thus speeding up the charging process. Lento uses high-grade components to assure the best performance and extended life of the unit.
Available Variants:
1450 VA / 24 VDC
2100 VA / 24 VDC
3.5 KVA / 48 VDC
5 KVA / 48 VDC & 96 VDC
7.5KVA / 120 VDC
10 KVA / 192 VDC
Product Description
Salient Features
Technical Documentation
Lento’s smart MPPT Solar chargers also play a dual role. The MPPT microprocessor and DSP-based module constantly measures the load current on the battery and prevents deep discharge thereby extending battery life. In highly demanding SPV installations and where performance and efficiency are more critical, the best solution is a maximum power point tracking (MPPT) based solar charger. Unlike the simple PWM MOSFET charge controller, MPPT solar chargers employ sophisticated microprocessor-based circuitry with a wide number of variable presentable parameters and also automatic configuration. The end result is a gain in efficiency by 30%, better battery performance, and also enhanced battery life.
Lento Smart MPPT solar chargers are made of military-grade components and undergo severe tests to withstand any climatic conditions. Lento smart MPPT solar chargers are designed for unattended operation for remote solar power installations and there are options available to configure the charge voltage and current according to the type of battery in use. The intelligent microprocessor-based technology in MPPT solar chargers not only check for the type of battery but also constantly monitor its condition and adjust the charge accordingly. SPV modules are supposed to deliver 17 volts maximum but this is under optimum conditions and provided the glass surfaces are kept clean, which is not taken care of in remote conditions with the result that output voltage and the current falls drastically. Lento MPPS solar chargers automatically factor in the reduced input and adjust output to ensure that the charging of the battery and its state does not become affected.
In addition to these basic features, Lento MPPT solar chargers incorporate automation and protection features that assure users of increased power, better battery life, consistently reliable performance, and assured life.
Max 20kva Single-phase Servo stabilizer (90v-260V)

Max 20kva Single-phase Servo stabilizer (90v-260V)
Max 20KVA Servo Stabilizer (90v-260v)
Max 20kva Single-phase Servo stabilizer (90v-260V) will protect all the electrical appliances both in your home and office.
This servo stabilizer comes with a wild range of input voltage from 90v-260v and a constant input of 220 volts, thus providing a stabilizer voltage supply and protecting all electrical appliances in your premises, both your home and offices, this includes Electronics, Fridge, and freezer, Smart TV, home theater, Air Condition, Satellite Decoder, washing machine, fans, etc.
Max stabilizers are of the best quality and Affordable stabilizer in Nigeria and West Africa, 20KVA servo stabilizer is based on digital technology that provides good protection and wonderful stabilization to all your Electrical Appliance both in your home and offices.
Max 20KVA servo stabilizer is designed as a central stabilizer to protect all house and offices equipment.
This 20KVA servo stabilizer can handle all inductive loads such as washing machines, air-condition, vacuum cleaners, etc.
This 20KVA SERVO stabilizer is built with the modern technology of special transformer of servo technology and it comes with digital control technology.
Features
APPLICATION
20kva Servo stabilizer
OUTPUT POWER CAPACITY |
1980 Watts / 2200 VA
|
|
---|---|---|
MAX CONFIGURABLE POWER (WATTS) |
1980 Watts / 2200 VA
|
|
NOMINAL OUTPUT VOLTAGE |
230V
|
|
OUTPUT VOLTAGE NOTE |
Configurable for 220 : 230 or 240 nominal output voltage
|
|
OUTPUT VOLTAGE DISTORTION |
Less than 2%
|
|
OUTPUT FREQUENCY (SYNC TO MAINS) |
50/60Hz /- 3 Hz
|
|
OTHER OUTPUT VOLTAGES |
220, 240V
|
|
CREST FACTOR |
3 : 1
|
|
Double Conversion Online
|
||
WAVEFORM TYPE |
Sine wave
|
|
OUTPUT CONNECTIONS |
(2) IEC 320 C19 (Battery Backup) , (2) IEC Jumpers (Battery Backup) , (8) IEC 320 C13 (Battery Backup)
|
|
BYPASS |
Internal Bypass (Automatic and Manual)
|
NOMINAL INPUT VOLTAGE |
230V
|
|
---|---|---|
INPUT FREQUENCY |
40 – 70 Hz (auto sensing)
|
|
INPUT CONNECTIONS |
British BS1363A , IEC-320 C20 , Schuko CEE 7 / EU1-16P
|
|
CORD LENGTH |
2.44 meters
|
|
INPUT VOLTAGE RANGE FOR MAIN OPERATIONS |
160 – 275 V
|
|
INPUT VOLTAGE ADJUSTABLE RANGE FOR MAINS OPERATION |
100 – 275 (half load)V
|
|
OTHER INPUT VOLTAGES |
220 , 240
|
BATTERY TYPE |
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
|
|
---|---|---|
INCLUDED BATTERY MODULES |
1
|
|
TYPICAL RECHARGE TIME |
3 hour(s)
|
|
REPLACEMENT BATTERY |
APCRBC141
|
|
RBC QUANTITY |
1
|
|
NOMINAL BATTERY VOLTAGE |
72V
|
INTERFACE PORT(S) |
RJ-45 Serial , Smart-Slot , USB
|
|
---|---|---|
AVAILABLE SMARTSLOT™ INTERFACE QUANTITY |
1
|
|
CONTROL PANEL |
Multi-function LCD status and control console
|
|
AUDIBLE ALARM |
Audible and visible alarms prioritized by severity
|
|
EMERGENCY POWER OFF (EPO) |
Yes
|
SURGE ENERGY RATING |
340 Joules
|
|
---|---|---|
FILTERING |
—
|
MAXIMUM HEIGHT |
432.0 mm
|
|
---|---|---|
MAXIMUM WIDTH |
85.0 mm
|
|
MAXIMUM DEPTH |
584.0 mm
|
|
NET WEIGHT |
25.0 kg
|
|
SHIPPING WEIGHT |
30.84 kg
|
|
SHIPPING HEIGHT |
246.0 mm
|
|
SHIPPING WIDTH |
599.0 mm
|
|
SHIPPING DEPTH |
810.0 mm
|
|
COLOR |
Black
|
|
UNITS PER PALLET |
12.0
|
OPERATING ENVIRONMENT |
0 – 40 °C
|
|
---|---|---|
OPERATING RELATIVE HUMIDITY |
0 – 95% non-condensing %
|
|
OPERATING ELEVATION |
0-3000 meters
|
|
STORAGE TEMPERATURE |
-15 – 45 °C
|
|
STORAGE RELATIVE HUMIDITY |
0 – 95% non-condensing %
|
|
STORAGE ELEVATION |
0-15000 meters
|
|
AUDIBLE NOISE AT 1 METER FROM SURFACE OF UNIT |
55.000 dB
|
|
ONLINE THERMAL DISSIPATION |
703.000 BTU/hr
|
|
PROTECTION CLASS |
IP 20
|
APPROVALS |
CE , CE Mark , EAC , EN/IEC 62040-1 , EN/IEC 62040-2 , RCM , VDE
|
|
---|---|---|
STANDARD WARRANTY |
3 years repair or replace (excluding battery) and 2 years for battery
|
ROHS |
Compliant
|
|
---|---|---|
REACH |
REACH: Contains No SVHCs
|
|
BATTERY DIRECTIVE |
Compliant
|