Delta 300 DLT series UPS, PWM controlled, IGBT technology, microcontroller controlled, sinusoidal waveform, ONLINE Double Conversion topology and parallel configurable devices. Advanced communication system supports many communication protocols and brings remote control advantage of the UPS.
Blue Gate 6.2KVA Online UPS Lf-Series (External 16pcs of 24ah Battery)
₦1,350,000 ₦1,490,000
Related products
-
UPS
APC SMART UPS SRT5KXLI 5000VA 230V
0 out of 5(0)Output
OUTPUT POWER CAPACITY
4500 Watts / 5000 VA
MAX CONFIGURABLE POWER (WATTS)
4500 Watts / 5000 VA
NOMINAL OUTPUT VOLTAGE
230V
OUTPUT VOLTAGE DISTORTION
Less than 2%
OUTPUT FREQUENCY (SYNC TO MAINS)
50/60Hz +/- 3 Hz
OTHER OUTPUT VOLTAGES
220, 240V
CREST FACTOR
3 : 1
Double Conversion Online
WAVEFORM TYPE
Sine wave
OUTPUT CONNECTIONS
(2) IEC Jumpers (Battery Backup) , (4) IEC 320 C19 (Battery Backup) , (6) IEC 320 C13 (Battery Backup)
BYPASS
Internal Bypass (Automatic and Manual)
Input
NOMINAL INPUT VOLTAGE
230V
INPUT FREQUENCY
40 – 70 Hz (auto sensing)
INPUT CONNECTIONS
Hard Wire 3 wire (1PH+N+G)
INPUT VOLTAGE RANGE FOR MAIN OPERATIONS
160 – 275 V
INPUT VOLTAGE ADJUSTABLE RANGE FOR MAINS OPERATION
100 – 275 (half load)V
OTHER INPUT VOLTAGES
220 , 240
Batteries & Runtime
BATTERY TYPE
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
INCLUDED BATTERY MODULES
2
TYPICAL RECHARGE TIME
1.5 hour(s)
REPLACEMENT BATTERY
APCRBC140
RBC QUANTITY
1
NOMINAL BATTERY VOLTAGE
192V
Communications & Management
INTERFACE PORT(S)
RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB
AVAILABLE SMARTSLOT™ INTERFACE QUANTITY
1
CONTROL PANEL
Multi-function LCD status and control console
AUDIBLE ALARM
Audible and visible alarms prioritized by severity
EMERGENCY POWER OFF (EPO)
Yes
Surge Protection and Filtering
SURGE ENERGY RATING
480 Joules
Physical
MAXIMUM HEIGHT
432.0 mm
MAXIMUM WIDTH
130.0 mm
MAXIMUM DEPTH
720.0 mm
NET WEIGHT
54.43 kg
SHIPPING WEIGHT
63.6 kg
SHIPPING HEIGHT
330.0 mm
SHIPPING WIDTH
610.0 mm
SHIPPING DEPTH
960.0 mm
COLOR
Black
UNITS PER PALLET
6.0
Environmental
OPERATING ENVIRONMENT
0 – 40 °C
OPERATING RELATIVE HUMIDITY
0 – 95% non-condensing %
OPERATING ELEVATION
0-3000 meters
STORAGE TEMPERATURE
-15 – 45 °C
STORAGE RELATIVE HUMIDITY
0 – 95% non-condensing %
STORAGE ELEVATION
0-15000 meters
AUDIBLE NOISE AT 1 METER FROM SURFACE OF UNIT
55.000 dB
ONLINE THERMAL DISSIPATION
931.000 BTU/hr
PROTECTION CLASS
IP 20
Conformance
APPROVALS
CE , CE Mark , EAC , EN/IEC 62040-1 , EN/IEC 62040-2 , IRAM , RCM , VDE
STANDARD WARRANTY
3 years repair or replace (excluding battery) and 2 years for battery
Sustainable Offer Status
ROHS
Compliant
REACH
REACH: Contains No SVHCsSKU: n/a
Recently Viewed products
7.5KVA 48V Pure sine wave inverter with 120A MPPT
A solar inverter, or converter, or PV inverter converts the variable DC output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be an off-grid electrical network. It is a critical balance of system–components in a solar power system, allowing the use of ordinary AC-powered equipment.
APC Smart-UPS SRT 6000VA 230V – SRT6KXLI
Specification:
100A MPPT Solar Charger controller (12V- 48V)

100A MPPT Solar Charger controller (12V- 48V)
12V/24V36/48V Auto work,parallel design
Multi-stage charging optimizes battery performance
MPPT eficiency >99.5%, Peak conversion efficiency 97.5%
Compatible with Gel. AGM.Flooded. Sealed lead acid and Lithium battery
Comprehensive protection
Heatsink cooling, quiet operation
Comfortable installation and commissioning
Monitoring your solar harvest on line via RS485 communition, Ethernet/RS232 communication Optional
Lento 3KVA 48V Pure Sine Wave Inverter
Lento offers next-generation smart MPPT based solar chargers for maximum efficiency and the highest performance required in demanding situations. MPPT stands for maximum power point tracking and Lento’s smart MPPT solar chargers play a crucial, central role in stand-alone and hybrid solar power installation. MPPT increases energy transfer efficiency by as much as 30% by calculating the maximum voltage available from the SPV modules at which maximum power is available for charging and sets the charging current accordingly. Output from SPV modules can vary considerably according to changing weather conditions and incorporation of MPPT means the charging conditions are always optimized by covering extra voltage to amperes and thus speeding up the charging process. Lento uses high-grade components to assure the best performance and extended life of the unit.
Available Variants:
1450 VA / 24 VDC
2100 VA / 24 VDC
3.5 KVA / 48 VDC
5 KVA / 48 VDC & 96 VDC
7.5KVA / 120 VDC
10 KVA / 192 VDC
Product Description
Salient Features
Technical Documentation
Lento’s smart MPPT Solar chargers also play a dual role. The MPPT microprocessor and DSP-based module constantly measures the load current on the battery and prevents deep discharge thereby extending battery life. In highly demanding SPV installations and where performance and efficiency are more critical, the best solution is a maximum power point tracking (MPPT) based solar charger. Unlike the simple PWM MOSFET charge controller, MPPT solar chargers employ sophisticated microprocessor-based circuitry with a wide number of variable presentable parameters and also automatic configuration. The end result is a gain in efficiency by 30%, better battery performance, and also enhanced battery life.
Lento Smart MPPT solar chargers are made of military-grade components and undergo severe tests to withstand any climatic conditions. Lento smart MPPT solar chargers are designed for unattended operation for remote solar power installations and there are options available to configure the charge voltage and current according to the type of battery in use. The intelligent microprocessor-based technology in MPPT solar chargers not only check for the type of battery but also constantly monitor its condition and adjust the charge accordingly. SPV modules are supposed to deliver 17 volts maximum but this is under optimum conditions and provided the glass surfaces are kept clean, which is not taken care of in remote conditions with the result that output voltage and the current falls drastically. Lento MPPS solar chargers automatically factor in the reduced input and adjust output to ensure that the charging of the battery and its state does not become affected.
In addition to these basic features, Lento MPPT solar chargers incorporate automation and protection features that assure users of increased power, better battery life, consistently reliable performance, and assured life.
30kVA/192V 3 PHASE HDSX SERIES INVERTER
HDSX Inverter
15KVA – 50KVA
The HDSX series Inverter is packed with powerful features such as pure sine wave output, intelligent LCD integration display and an added fault query function, which makes its operation easy to monitor in real time.
The HDSX Series higher KVA solutions offer high quality and reliable power back-up solutions for running such loads, meeting such needs and handling such equipment
MPPT Solar Charge Controller 40A, 12/48V

MPPT Solar Charge Controller 40A, 12/48V
40A, 12/48V Auto Voltage, High Efficiency, Programmable
This XTRA-4210N with the ability to work with different display units (XDB1/XDS1 /XDS2). It also adopts the water-proof design with more professional protection chip for the communication port to provide reliability and meeting the different requirements.
Submersible DC Solar Water Pump + Inbuilt Controller
Submersible DC solar water pump is designed as DC brush motor driving pump impellers, by connecting to solar panels directly. The power from solar panels can drive this pump. This type of pump is mostly used in areas, where lack of electricity or strict requirement for environmental protection. DC solar pump is suitable to pump and drainage water, which doesn’t need a controller. Moreover, the installation is very simple. This type of pump is mainly used in homes, institutions, fields of power plants, steel mills, mining, chemical, fire, water plants, agricultural irrigation, and other industries. Specifications: Voltage: 24/36volts Power: 250watts Max flow: 2(M3/h) Max head: 25m Outlet: 1” Solar Panel capacity: 250/300watts – (24volt). Battery Capacity: 24volt Free installation Cable: 20m. Higher capacities are available on request.
This series of UPS is based on true on-line double conversion design, which avoids kinds of interference from Mains. The output of the UPS is stable, low-THD pure sine wave, with adjustable input/output characteristics which enhance its flexibility as well as performance. Application Critical servers, storage application and other networking equipment. Features True on-line double conversion design providing all power protection. Sine wave pulse width modulation. IGBT inverter design. Wide Input voltage windows. Pure sine wave output with less than 3% THD. Expandable backup time. Generator compatible. Cold start. Load/Battery power meter display. Overload, on-line, battery status LED/LCD. Advanced Battery Management. Automatic charging in UPS off mode. Zero transfer time on AC mode to/ from battery mode, AC mode to/ from bypass mode. Smart RS-232 communication port.