Subtotal:
₦20,783,060
-27%
650VA Vectronic Offline UPS
₦22,000 ₦30,000
Description:
Profile: Compact
Rating: 650VA
Voltage: 220/230Vac
Frequency: 50Hz
In-built AVR: Very Wide Input Range
Related products
-
UPS
Maxtron UPS – 650VA
Maxtron UPS possesses Boost and Trim Automatic Voltage Regulation (AVR). It gives higher application availability by correcting low and high voltage conditions without using the battery. Intelligent battery management, maximizes battery performance, life, and reliability through intelligent, precision charging.
SKU: n/a -
UPS
APC Smart UPS SMC1500I C 1500VA LCD 230V
Output
-
Output power capacity
900Watts / 1.5 kVA
-
Max Configurable Power (Watts)
900Watts / 1.5 kVA
-
Nominal Output Voltage
230V
-
Output Voltage Distortion
Less than 5% at full load
-
Output Frequency (sync to mains)
47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal
-
Topology
Line Interactive
-
Waveform type
Sine wave
-
Output Connections(8) IEC 320 C13 (Battery Backup)(2) IEC Jumpers (Battery Backup)
Input
-
Nominal Input Voltage
230V
-
Input frequency
50/60 Hz +/- 3 Hz (auto sensing)
-
Input Connections
IEC-320 C14
-
Input voltage range for main operations
180 – 287V
-
Input voltage adjustable range for mains operation
170 – 300V
-
Other Input Voltages
220, 240
Batteries & Runtime
-
Battery type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
-
Typical recharge time
3hour(s)
-
Replacement Battery
-
Expected Battery Life (years)
3 – 5
-
RBC Quantity
1
-
Runtime
-
Efficiency
Communications & Management
-
Interface Port(s)
USB
-
Control panel
Multi-function LCD status and control console
-
Audible Alarm
Alarm when on battery : distinctive low battery alarm : configurable delays
-
Emergency Power Off (EPO)
—
Surge Protection and Filtering
-
Surge energy rating
459Joules
-
Filtering
Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449
Physical
-
Maximum Height
219mm , 21.9CM
-
Maximum Width
171mm , 17.1CM
-
Maximum Depth
439mm , 43.9CM
-
Net Weight
24.09KG
-
Shipping weight
27.23KG
-
Shipping Height
376mm , 37.6CM
-
Shipping Width
328mm , 32.8CM
-
Shipping Depth
595mm , 59.5CM
-
Color
Black
-
Master Carton Units
1.0
-
Units per Pallet
18.0
Environmental
-
Operating Temperature
0 – 40 °C
-
Operating Relative Humidity
0 – 95 %
-
Operating Elevation
0-3000meters
-
Storage Temperature
-15 – 45 °C
-
Storage Relative Humidity
0 – 95 %
-
Storage Elevation
0-15000meters
-
Audible noise at 1 meter from surface of unit
45.0dBA
-
Online thermal dissipation
135.0BTU/hr
Conformance
-
Approvals
C-tick, CE, CSA, GOST, UL 1778, VDE
-
Standard warranty
2 years repair or replace
Sustainable Offer Status
-
RoHS
Compliant
-
REACH
REACH: Contains No SVHCs
SKU: n/a -
Recently Viewed products
Prag Stabilizer, Servo Stabilizer, Servo Voltage Stabilizer, Stabilizer
15kva servo stabilizer (130-160v)
Prag Stabilizer, Servo Stabilizer, Servo Voltage Stabilizer, Stabilizer
15kva servo stabilizer (130-160v)
15KVA Servo Voltage Stabilizer 130-260V will Stablize, Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
Low, High, Fluctuating NEPA Voltage? One Central Stabilizer for your entire Flat, Home, Office, etc.
Input Voltage Range of 130V-260V
TND-15K Servo Automatic Voltage Stabilizer Series is based on digital technology; provides voltage stabilization and protection to appliances and equipment; designed as a central stabilizer to handle all house loads.
Features
Input voltage range (130V-260V)
Steady output voltage
Digital Control
Servo Control + Toroidal Transformer System
LED display
Low and Over voltage protection
SKU: n/a
Solar solution packages
1kva Solar Inverter Power Generator
access to lights, very good for – TV, 4 to 6 rooms light points, small standing fan 45 to 50watts or rechargeable fan, laptops, phones, sound system, electric clipper, etc.
This package is for low watts rate home or office appliances, You can upgrade this package with more battery and solar to increase the charging speed, and hour of use.
This package has an uninterrupted power supply (UPS), the power will not cut off when the city light is off during use.
The solar panel, battery, and inverter, shape height, color, brand, or look we are going to supply may be different from The image on the advert, But we are sending the rate, quality, and best quality mentioned in the descriptions below or above.
Sunlight is free, quickly take advantage.
Generate your own electricity from the sun.
SKU: n/a
Solar Products
Submersible DC Solar Water Pump + Inbuilt Controller
Submersible DC solar water pump is designed as DC brush motor driving pump impellers, by connecting to solar panels directly. The power from solar panels can drive this pump. This type of pump is mostly used in areas, where lack of electricity or strict requirement for environmental protection. DC solar pump is suitable to pump and drainage water, which doesn’t need a controller. Moreover, the installation is very simple. This type of pump is mainly used in homes, institutions, fields of power plants, steel mills, mining, chemical, fire, water plants, agricultural irrigation, and other industries. Specifications: Voltage: 24/36volts Power: 250watts Max flow: 2(M3/h) Max head: 25m Outlet: 1” Solar Panel capacity: 250/300watts – (24volt). Battery Capacity: 24volt Free installation Cable: 20m. Higher capacities are available on request.
SKU: n/a
Inverter
Lento 3KVA 48V Pure Sine Wave Inverter
Lento offers next-generation smart MPPT based solar chargers for maximum efficiency and the highest performance required in demanding situations. MPPT stands for maximum power point tracking and Lento’s smart MPPT solar chargers play a crucial, central role in stand-alone and hybrid solar power installation. MPPT increases energy transfer efficiency by as much as 30% by calculating the maximum voltage available from the SPV modules at which maximum power is available for charging and sets the charging current accordingly. Output from SPV modules can vary considerably according to changing weather conditions and incorporation of MPPT means the charging conditions are always optimized by covering extra voltage to amperes and thus speeding up the charging process. Lento uses high-grade components to assure the best performance and extended life of the unit.
Available Variants:
1450 VA / 24 VDC
2100 VA / 24 VDC
3.5 KVA / 48 VDC
5 KVA / 48 VDC & 96 VDC
7.5KVA / 120 VDC
10 KVA / 192 VDC
Product Description
Salient Features
Technical Documentation
Lento’s smart MPPT Solar chargers also play a dual role. The MPPT microprocessor and DSP-based module constantly measures the load current on the battery and prevents deep discharge thereby extending battery life. In highly demanding SPV installations and where performance and efficiency are more critical, the best solution is a maximum power point tracking (MPPT) based solar charger. Unlike the simple PWM MOSFET charge controller, MPPT solar chargers employ sophisticated microprocessor-based circuitry with a wide number of variable presentable parameters and also automatic configuration. The end result is a gain in efficiency by 30%, better battery performance, and also enhanced battery life.
Lento Smart MPPT solar chargers are made of military-grade components and undergo severe tests to withstand any climatic conditions. Lento smart MPPT solar chargers are designed for unattended operation for remote solar power installations and there are options available to configure the charge voltage and current according to the type of battery in use. The intelligent microprocessor-based technology in MPPT solar chargers not only check for the type of battery but also constantly monitor its condition and adjust the charge accordingly. SPV modules are supposed to deliver 17 volts maximum but this is under optimum conditions and provided the glass surfaces are kept clean, which is not taken care of in remote conditions with the result that output voltage and the current falls drastically. Lento MPPS solar chargers automatically factor in the reduced input and adjust output to ensure that the charging of the battery and its state does not become affected.
In addition to these basic features, Lento MPPT solar chargers incorporate automation and protection features that assure users of increased power, better battery life, consistently reliable performance, and assured life.
SKU: n/a
Hybrid Inverter, Inverter, SMK Inverter
3.5KVA 3.5kW 24V Transformerless Hybrid Inverter with inbuilt 100A MPPT solar charger controller
Hybrid Inverter, Inverter, SMK Inverter
3.5KVA 3.5kW 24V Transformerless Hybrid Inverter with inbuilt 100A MPPT solar charger controller
Features:
Input Voltage: 500Vdc Max
Output Voltage: 220V/230V; 110V/120V
Output Current: 60a
Output Frequency: 50/60hz
Output Type: Single, Triple
Size: 448*295*105
Type: DC/AC Inverters
Inverter Efficiency: 97%
Certificate: CE&EMC
Weight: 11KG
Solar charge controller: Built in 80A-100A MPPT
Power Factor: 1.0 (not 0.8)
Efficiency: over 93%
Waveform: Pure sine wave
Parallel operation: HHP-48 supports from 9/12 units
PV voltage range: 120-450VDC
Communication ways: USB/RS232/Dry contact
Monitoring ways: optional for NB-IOT/GPRS/WIFI
Operation Phase: Single phase (HHP48 supports 3 phase)
SKU: n/a
Prag Stabilizer, Servo Voltage Stabilizer, Single Phase Stabilizer, Stabilizer
PRAG 30KVA Servo Stabilizer (130-260V)
Prag Stabilizer, Servo Voltage Stabilizer, Single Phase Stabilizer, Stabilizer
PRAG 30KVA Servo Stabilizer (130-260V)
The PRAG 30KVA Servo Stabilizer 130-260V Stablize’s and Protect all electrical appliances in your premises, both home and office: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
Low, High, Fluctuating NEPA Voltage?
Firstly, if you are having a low or high NEPA voltage current or you want a 30kva stabilizer at a good price in Nigeria, One Central Stabilizer from PRAG for your entire Flat, Home, Office, etc will do the job.
Equally important is to note that the Input Voltage is (130V-260V)
Moreover, our stabilizers are of the best quality and good prices. They also Stabilize and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
In addition to all these, the PC-SVC-W20K Servo Automatic Voltage Stabilizer Series is based on digital technology that provides voltage stabilization and protection to appliances and equipment. As a matter of fact, they are designed as a central stabilizer to handle all house or office loads.
Click here to know more about the best stabilizer selection
Features of 30KVA Servo Stabilizer (130V-260V)
Input Voltage (130V to 260V)
Steady output voltage
Digital Control
Servo Technology
Wall-mounted
LED display
Low and Overvoltage protection
SKU: n/a
Inverter
Lento Inverter 2.1KVA 24V Pure Sine Wave
Lento offers next generation smart MPPT based solar chargers for maximum efficiency and highest performance required in demanding situation. MPPT stands for maximum power point tracking and Lento’s smart MPPT solar chargers play a crucial, central role in stand alone and hybrid solar power installation. MPPT increases energy transfer efficiency by as much as 30% by calculating maximum voltage available from the SPV modules at which maximum power is available for charging and sets the charging current accordingly. Output from SPV modules can vary considerably according to changing weather conditions and incorporation of MPPT means the charging conditions are always optimized by covering extra voltage to amperes and thus speeding up the charging process. Lento uses high grade components to assure best performance and extended life of the unit.
Available Variants:
1450 VA / 24 VDC
2100 VA / 24 VDC
3.5 KVA / 48 VDC
5 KVA / 48 VDC & 96 VDC
7.5KVA / 120 VDC
10 KVA / 192 VDC
Product Description
Salient Features
Technical Documentation
Lento’s smart MPPT Solar chargers also play a dual role. The MPPT microprocessor and DSP based module constantly measures the load current on the battery and prevents deep discharge thereby extending battery life. In highly demanding SPV installations and where performance and efficiency are more critical the best solution is a maximum power point tracking (MPPT) based solar charger. Unlike the simple PWM MOSFET charge controller, MPPT solar chargers employ sophisticated microprocessor based circuitry with a wide number of variable presentable parameters and also automatic configuration. The end result is gain in efficiency by 30%, better battery performance and also enhanced battery life.
Lento Smart MPPT solar chargers are made of military grade components and undergo severe tests to withstand any climatic conditions. Lento smart MPPT solar chargers are designed for unattended operation for remote solar power installations and there are options available to configure the charge voltage and current according to the type of battery in use. The intelligent microprocessor based technology in MPPT solar chargers not only check for type of battery but also constantly monitor its condition and adjust charge accordingly. SPV modules are supposed to deliver 17 volts maximum but this is under optimum conditions and provided the glass surfaces are kept clean, which is not taken care of in remote conditions with the result that output voltage and current falls drastically. Lento MPPS solar chargers automatically factor in the reduced input and adjust output to ensure that charging of the battery and its state does not become affected.
In addition to the these basic features, Lento MPPT solar chargers incorporate automation and protection features that assure users of increased power, better battery life, consistently reliable performance and assured life.
SKU: n/a
| Input | |
| Voltage: | 220 / 230 / 240 Vac |
| Tolerance | Normal Over-voltage: 280V |
| Withstand Over-voltage: 284V (max limit 285V) | |
| Under-voltage limit: 145V (lowest limit 142V) | |
| Output | |
| Voltage: | 220/230V ± 10%, ± 1% on battery |
| Power Factor | 0.6 . |
| Transfer Time: | 2 – 6 ms (Typical) |
| Frequency: | 50Hz (On Battery) |
| Waveform: | Sine Wave on normal; Simulated Sine on battery |
| DC Bus: | |
| 650VA | 12V |
| 1000VA | 24V |
| 1500VA | 24V |
| 2000VA | 24V |
| 3000VA | 48V |
| Cold-Start Function: | Yes |
| Charging Time: | 6hr to recover to 90% capacity |
| Battery Charging in OFF Mode: | Yes |
| User Interface: | |
| Indications for | Normal mode |
| Battery mode / mains fail | |
| Low battery | |
| UPS fault | |
| Environment: | |
| Temperature: | 0 ~ 40oC |
| Humidity: | 20 ~ 90% Non-condensing |
| Noise Level: | Noise Level: Less than 40dB |
| Physical: | |
| Dimensions | 600 – 650VA: 279x101x142 (DxWxH) |
| 1000 – 2000VA: 320x130x182 (DxWxH) | |
| 3000VA: 460x138x166 (DxWxH) | |
| Weight (Kg) | 650VA : 4.3 |
| 1000VA : 7.9 | |
| 1500VA : 11 | |
| 2000VA : 10.7 | |
| 3000VA : 19.7 | |
