Subtotal:
₦13,927,000
-16%
3kVA Vectronic Online UPS
₦260,000 ₦310,000
Description:
Profie: Tower
Range: 3kVA
Voltage: 400Vac
Frequency: 50Hz
Related products
-
UPS
Mercury ELITE PRO 1000VA UPS
Mercury ELITE1000 PROELITE1000 PRO
​When it comes to power solutions, you can rest assured when you use Mercury UPS. Mercury offers you a wide range of configurations. No matter you are a home user or you are looking for a corporate solution, you can rely on Mercury UPS.Features:
- Output Short Circuit Protection
- Intelligent Battery Management
- Over Temperature Protection
- Wide Range Of Input Voltage
- Overload Protection
- Auto Restart
- Dataline Protection
- Surge Protection
- DC Start
Specifications:
- Input Voltage 220VAC
- Input Frequency 50Hz
- Input Phase Single Phase
- Input Socket with FUSE
- Cold Start (0~100% load)
- Press the ON / OFF Switch
- Input Range (220V) 140V~285V
- Normal Frequency 50Hz
- Rating Output (VA) 1000VA
- Rating Output (W) 600W
- Waveform Battery Mode (Simulated Sine Wave)AC Mode (Sine Wave)
- Power Factor 0.6
- Rating Voltage 220V
- Output Range 220VAC +17~22%(No Load Connected)
- Rear Output Socket 3x IEC – Battery Backup
- Transfer Time Typical 8ms (max 15ms)
- Short Circuit Protection Line
- Mode FUSE & Software Protection 100%~120% (gives alarm & shut down in 3min)120%~130% (beeps alarm & shut down in 30s)>130% (shut down immediately)
- Battery Mode Software Protection controlled by CPU100%~110% (gives alarm & shut down in 10s)>110% (shut down immediately)
- Battery & Runtime Rating 12V / 9AH x1
- Battery & Runtime Backup Time Typical 8mins~20mins
- Battery & Runtime Change Current 1.5A (max)
- Battery & Runtime Over Charge >14.8V ±0.5 (Stop Charging)
- Battery & Runtime Protection
SKU: n/a -
UPS
APC SMART UPS SRT5KXLI 5000VA 230V
Output
OUTPUT POWER CAPACITY
4500 Watts / 5000 VA
MAX CONFIGURABLE POWER (WATTS)
4500 Watts / 5000 VA
NOMINAL OUTPUT VOLTAGE
230V
OUTPUT VOLTAGE DISTORTION
Less than 2%
OUTPUT FREQUENCY (SYNC TO MAINS)
50/60Hz +/- 3 Hz
OTHER OUTPUT VOLTAGES
220, 240V
CREST FACTOR
3 : 1
Double Conversion Online
WAVEFORM TYPE
Sine wave
OUTPUT CONNECTIONS
(2) IEC Jumpers (Battery Backup) , (4) IEC 320 C19 (Battery Backup) , (6) IEC 320 C13 (Battery Backup)
BYPASS
Internal Bypass (Automatic and Manual)
Input
NOMINAL INPUT VOLTAGE
230V
INPUT FREQUENCY
40 – 70 Hz (auto sensing)
INPUT CONNECTIONS
Hard Wire 3 wire (1PH+N+G)
INPUT VOLTAGE RANGE FOR MAIN OPERATIONS
160 – 275 V
INPUT VOLTAGE ADJUSTABLE RANGE FOR MAINS OPERATION
100 – 275 (half load)V
OTHER INPUT VOLTAGES
220 , 240
Batteries & Runtime
BATTERY TYPE
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
INCLUDED BATTERY MODULES
2
TYPICAL RECHARGE TIME
1.5 hour(s)
REPLACEMENT BATTERY
APCRBC140
RBC QUANTITY
1
NOMINAL BATTERY VOLTAGE
192V
Communications & Management
INTERFACE PORT(S)
RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB
AVAILABLE SMARTSLOT™ INTERFACE QUANTITY
1
CONTROL PANEL
Multi-function LCD status and control console
AUDIBLE ALARM
Audible and visible alarms prioritized by severity
EMERGENCY POWER OFF (EPO)
Yes
Surge Protection and Filtering
SURGE ENERGY RATING
480 Joules
Physical
MAXIMUM HEIGHT
432.0 mm
MAXIMUM WIDTH
130.0 mm
MAXIMUM DEPTH
720.0 mm
NET WEIGHT
54.43 kg
SHIPPING WEIGHT
63.6 kg
SHIPPING HEIGHT
330.0 mm
SHIPPING WIDTH
610.0 mm
SHIPPING DEPTH
960.0 mm
COLOR
Black
UNITS PER PALLET
6.0
Environmental
OPERATING ENVIRONMENT
0 – 40 °C
OPERATING RELATIVE HUMIDITY
0 – 95% non-condensing %
OPERATING ELEVATION
0-3000 meters
STORAGE TEMPERATURE
-15 – 45 °C
STORAGE RELATIVE HUMIDITY
0 – 95% non-condensing %
STORAGE ELEVATION
0-15000 meters
AUDIBLE NOISE AT 1 METER FROM SURFACE OF UNIT
55.000 dB
ONLINE THERMAL DISSIPATION
931.000 BTU/hr
PROTECTION CLASS
IP 20
Conformance
APPROVALS
CE , CE Mark , EAC , EN/IEC 62040-1 , EN/IEC 62040-2 , IRAM , RCM , VDE
STANDARD WARRANTY
3 years repair or replace (excluding battery) and 2 years for battery
Sustainable Offer Status
ROHS
Compliant
REACH
REACH: Contains No SVHCsSKU: n/a
Recently Viewed products
Relay Voltage Stabilizer, Single Phase Stabilizer, Stabilizer
10KVA Relay Voltage Stabilizer (45V-270V)
Relay Voltage Stabilizer, Single Phase Stabilizer, Stabilizer
10KVA Relay Voltage Stabilizer (45V-270V)
PRODUCT FEATURES
The product of this model is a 220V fully automatic voltage regulator, with an LED digital display design, USB charging interface, it is characterized by stable work, high-pressure regulation speed, and wide range.
APPLICATION
It is widely used in various industries, small office equipment,refrigerator, electric fan, computer, pump, air conditioner and other household appliances.
SKU: n/a
Prag Stabilizer, Servo Voltage Stabilizer, Single Phase Stabilizer, Stabilizer
PRAG 20KVA Relay Stabilizer (95V-280V)
Prag Stabilizer, Servo Voltage Stabilizer, Single Phase Stabilizer, Stabilizer
PRAG 20KVA Relay Stabilizer (95V-280V)
PRAG 20KVA relay stabilizer (95V-280V) Stablize’s and protect all electrical appliances in your premises, both home and office. This includes Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
Low, High, Fluctuating NEPA Voltage?
Firstly, if you are having low or high NEPA voltage current in your house or office, you can go for our 5kva stabilizer with good quality and fantastic price in Nigeria. One Central Stabilizer from PRAG for your entire Flat, Home, Office, etc will do the job.
Equally important to note is that the Input Voltage for our PRAG 20KVA Relay Voltage Stabilizer is from 95V to 280V.
Moreover, our stabilizers are of the best quality and good prices. They also Stabilize and Protect all electrical appliances on your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
In addition to all these, the 20KVA (95-280V)-RELAY is based on digital technology that provides voltage stabilization and protection to appliances and equipment. As a matter of fact, they are designed as a central stabilizer to handle all house or office loads. Finally, this means that your entire load should not be more than the capacity of your Stabilizer at any given point.
Features of 20kva+ relay voltage stabilizer
Advanced Relay
2 Fans
Input Voltage Range (95V-280V)
More Load
Steady output voltage
Digital Control
Relay Control + Toroidal Transformer Technology
LED display
Low and Overvoltage protection
SKU: n/a
MPPT charge controller, Solar Charge Controller, Solar Products
100A MPPT Solar Charger controller (12V- 48V)
MPPT charge controller, Solar Charge Controller, Solar Products
100A MPPT Solar Charger controller (12V- 48V)
12V/24V36/48V Auto work,parallel design
Multi-stage charging optimizes battery performance
MPPT eficiency >99.5%, Peak conversion efficiency 97.5%
Compatible with Gel. AGM.Flooded. Sealed lead acid and Lithium battery
Comprehensive protection
Heatsink cooling, quiet operation
Comfortable installation and commissioning
Monitoring your solar harvest on line via RS485 communition, Ethernet/RS232 communication Optional
SKU: n/a
Inverter, Kartel Inverter
30kVA/192V NB SERIES INVERTER
NB Series Inverter
15KVA and above.
The NB Series inverters are specially designed for industrial, outdoor, and rail applications.
This high-quality range of inverters will suit your needs for stable power in any strained environment, plus will give you the benefit of small units coupled with a great variety of technical features.
SKU: n/a
Inverter
Lento 3KVA 48V Pure Sine Wave Inverter
Lento offers next-generation smart MPPT based solar chargers for maximum efficiency and the highest performance required in demanding situations. MPPT stands for maximum power point tracking and Lento’s smart MPPT solar chargers play a crucial, central role in stand-alone and hybrid solar power installation. MPPT increases energy transfer efficiency by as much as 30% by calculating the maximum voltage available from the SPV modules at which maximum power is available for charging and sets the charging current accordingly. Output from SPV modules can vary considerably according to changing weather conditions and incorporation of MPPT means the charging conditions are always optimized by covering extra voltage to amperes and thus speeding up the charging process. Lento uses high-grade components to assure the best performance and extended life of the unit.
Available Variants:
1450 VA / 24 VDC
2100 VA / 24 VDC
3.5 KVA / 48 VDC
5 KVA / 48 VDC & 96 VDC
7.5KVA / 120 VDC
10 KVA / 192 VDC
Product Description
Salient Features
Technical Documentation
Lento’s smart MPPT Solar chargers also play a dual role. The MPPT microprocessor and DSP-based module constantly measures the load current on the battery and prevents deep discharge thereby extending battery life. In highly demanding SPV installations and where performance and efficiency are more critical, the best solution is a maximum power point tracking (MPPT) based solar charger. Unlike the simple PWM MOSFET charge controller, MPPT solar chargers employ sophisticated microprocessor-based circuitry with a wide number of variable presentable parameters and also automatic configuration. The end result is a gain in efficiency by 30%, better battery performance, and also enhanced battery life.
Lento Smart MPPT solar chargers are made of military-grade components and undergo severe tests to withstand any climatic conditions. Lento smart MPPT solar chargers are designed for unattended operation for remote solar power installations and there are options available to configure the charge voltage and current according to the type of battery in use. The intelligent microprocessor-based technology in MPPT solar chargers not only check for the type of battery but also constantly monitor its condition and adjust the charge accordingly. SPV modules are supposed to deliver 17 volts maximum but this is under optimum conditions and provided the glass surfaces are kept clean, which is not taken care of in remote conditions with the result that output voltage and the current falls drastically. Lento MPPS solar chargers automatically factor in the reduced input and adjust output to ensure that the charging of the battery and its state does not become affected.
In addition to these basic features, Lento MPPT solar chargers incorporate automation and protection features that assure users of increased power, better battery life, consistently reliable performance, and assured life.
SKU: n/a
MPPT charge controller, Solar Products
40A 12V/24V/48V Kartel solar charge controller MPPT
Features
Intelligent battery management function, extend battery life
Wide PV input voltage range, convenient for system configuration.
Multiple working modes to adapt different working occasion.
Advanced MPPT tracking, 99% tracking efficiency
SKU: n/a
| Input | |
| Voltage | 400 Vac |
| Tolerance | 320 – 450V |
| Frequency | 50Hz ± 6% |
| Output | |
| Voltage | 400Vac ± 1% |
| Power Factor | 0.8 |
| Transfer Time | 0 ms |
| Frequency | 50Hz ± 6% (On Mains) |
| 50Hz ± 0.5% (On Battery) | |
| Waveform | Pure Sine Wave |
| THDi | Linear Load ≤ 3%; Non-linear Load ≤ 5% |
| Crest Factor | 3 : 1 (Max) |
| Bypass Facility | Maintenance Bypass and Static Bypass |
| DC Bus / DC Functions: | |
| DC Bus Voltage | 384V |
| Charging Current | 5 – 20A, Adjustable |
| Cold-Start Function | Yes |
| Battery Charging in OFF Mode | Yes |
| Battery Type | Sealed, Maintenance-free VRLA |
| LCD User Interface: | |
| Metering / Indications for | Voltage |
| Load % | |
| Frequency | |
| General Status | |
| Alarm | |
| Communication: | |
| Interfaces | RS232 |
| Overload | |
| 105~125% | 10 mins (Output swithes to bypass after 60s) |
| >130% | 1 min |
| Environment: | |
| Temperature | 0 ~ 40oC |
| Humidity | 20 ~ 90% Non-condensing |
| Altitude | < 1000m |
| IP Class | 20 |
| Physical: | |
| Dimensions (mm) | 10-20kVA : 560 x 700 x 1040 (W x D x H) |
| 30-40kVA : 660 x 800 x 1380 (W x D x H) | |
| 60-80kVA : 1540 x 880 x 1570 (W x D x H) | |
| 100-200kVA : 2000 x 980 x 1800 (W x D x H) | |
| Weight (Kg) | 10kVA : 260kg |
| 15kVA : 350kg | |
| 20kVA : 400kg | |
| 30kVA : 480kg | |
| 40kVA : 650kg | |
| 60kVA : 650kg | |
| 80kVA : 1200kg | |
| 100kVA : 1330kg | |
| 120-200kVA : On Request | |
