Lento 3KVA 48V Pure Sine Wave Inverter
₦200,000
Lento offers next-generation smart MPPT based solar chargers for maximum efficiency and the highest performance required in demanding situations. MPPT stands for maximum power point tracking and Lento’s smart MPPT solar chargers play a crucial, central role in stand-alone and hybrid solar power installation. MPPT increases energy transfer efficiency by as much as 30% by calculating the maximum voltage available from the SPV modules at which maximum power is available for charging and sets the charging current accordingly. Output from SPV modules can vary considerably according to changing weather conditions and incorporation of MPPT means the charging conditions are always optimized by covering extra voltage to amperes and thus speeding up the charging process. Lento uses high-grade components to assure the best performance and extended life of the unit.
Available Variants:
1450 VA / 24 VDC
2100 VA / 24 VDC
3.5 KVA / 48 VDC
5 KVA / 48 VDC & 96 VDC
7.5KVA / 120 VDC
10 KVA / 192 VDC
Product Description
Salient Features
Technical Documentation
Lento’s smart MPPT Solar chargers also play a dual role. The MPPT microprocessor and DSP-based module constantly measures the load current on the battery and prevents deep discharge thereby extending battery life. In highly demanding SPV installations and where performance and efficiency are more critical, the best solution is a maximum power point tracking (MPPT) based solar charger. Unlike the simple PWM MOSFET charge controller, MPPT solar chargers employ sophisticated microprocessor-based circuitry with a wide number of variable presentable parameters and also automatic configuration. The end result is a gain in efficiency by 30%, better battery performance, and also enhanced battery life.
Lento Smart MPPT solar chargers are made of military-grade components and undergo severe tests to withstand any climatic conditions. Lento smart MPPT solar chargers are designed for unattended operation for remote solar power installations and there are options available to configure the charge voltage and current according to the type of battery in use. The intelligent microprocessor-based technology in MPPT solar chargers not only check for the type of battery but also constantly monitor its condition and adjust the charge accordingly. SPV modules are supposed to deliver 17 volts maximum but this is under optimum conditions and provided the glass surfaces are kept clean, which is not taken care of in remote conditions with the result that output voltage and the current falls drastically. Lento MPPS solar chargers automatically factor in the reduced input and adjust output to ensure that the charging of the battery and its state does not become affected.
In addition to these basic features, Lento MPPT solar chargers incorporate automation and protection features that assure users of increased power, better battery life, consistently reliable performance, and assured life.
Related products
-
Hybrid Inverter, Inverter
GENUS 2.5KVA/36V INVERTER
0 out of 5(0)Product Code: SIL10711 Key Features Clean Quality power supply – Keeps expensive appliances 100% safe LCD Display (Message and Faults) to monitor Inverter Performance Auto self-test on LCD Noise-free performance Ensures the longer battery life Smarter Overload Sense, Short Circuit Protection.SKU: n/a
Recently Viewed products
3kVA 24v Inverter ISH series
Zektron ISH series is a pure sine wave inverter with fully digital microprocessor control and a wider input voltage, this inverter is compatible with generators. With its transformer design, it can provide more protection to the load which is under unstable power condition
Rilsopower Three-Phase Stabilizer SJW 60-KVA

Rilsopower Three-Phase Stabilizer SJW 60-KVA
To begin with, it comes with a wide range of input voltage VAC and a constant output, thus providing a stabilizer voltage supply and protecting all electrical appliances in your premises: Air conditioner, Fridge, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
•Rilsopower Three-Phase Stabilizer SJW 50-KVA |
|
|||
•Stepless voltage regulation over a wide range | ||||
• wide input voltage range (260 – 490)VAC | ||||
•Steady output voltage | ||||
•Surge protection voltage stabilizer | ||||
•Informative LED-display | ||||
•Low/High voltage power Protection | ||||
APPLICATION | ||||
•Home Appliances | ||||
•Office Equipment and Industrial Use | ||||
•Telecommunication and Data Center | ||||
•General use |
30kVA/192V 3 PHASE HDSX SERIES INVERTER
HDSX Inverter
15KVA – 50KVA
The HDSX series Inverter is packed with powerful features such as pure sine wave output, intelligent LCD integration display and an added fault query function, which makes its operation easy to monitor in real time.
The HDSX Series higher KVA solutions offer high quality and reliable power back-up solutions for running such loads, meeting such needs and handling such equipment
JORDY ELE 40KVA Servo Single Phase Central Industrial Stabilizer 80v-280v

JORDY ELE 40KVA Servo Single Phase Central Industrial Stabilizer 80v-280v
Low, High, Fluctuating NEPA Voltage? Now you can get your mind to rest rest with this heavy duty low cost high grade and high power Servo motorized Industrial stabilizer.
One Central Stabilizer for your entire Flat, Home, Office, etc.
Input Voltage 80v-280V)
Stabilize and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
JT-40kva Servo Automatic Voltage Stabilizer Series is based on digital technology; provides voltage stabilization and protection to appliances and equipment; designed as a central stabilizer to handle all house and industrial loads. \no need to worry for brown outs, burn outs and ertic power anymore.
Input voltage: 80V-280V AC
Power: 40kva
Technology: Servo Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 380V ± 10%
Phase: SINGLE
100Liters SOLAR AC/DC FREEZER with Battery and Solar Panel Combo

100Liters SOLAR AC/DC FREEZER with Battery and Solar Panel Combo
This chest freezer solar refrigerator is the best solar deep freezer in Nigeria with record-breaking sales in Nigeria, solar freezer sell in Lagos, other solar freezers on Jiji and above the quality of felicity solar freezer and other inverter freezers in Nigeria.
SMKSolar was developed to be energy-efficient and sustainable in most rural places. The dc solar freezer&refrigerator requires very little energy and has a maintenance-free dc compressor.? Equipped with extra-thick insulations, solar freezer & refrigerator can stay cold in? Hot temperatures.
Free energy straight from the sun.
1, totally cfc free refrigerant.
2, high-quality dc compressor with good performance.
3, can work at dc 12v / 24v & ac110- 220v.
4, energy-saving technology.
The package consists of :
1pc /200-litre solar deep freezer.
1 battery is required
1 300w solar panels
1 Solar Charge controller
Zektron 10kVA 192v Inverter ISH series
Zektron ISH series is a pure sine wave inverter with fully digital microprocessor control and a wider input voltage, this inverter is compatible with generators. With its transformer design, it can provide more protection to the load which is under unstable power condition.
Lento 3KVA 48V Pure Sine Wave Inverter
Lento offers next-generation smart MPPT based solar chargers for maximum efficiency and the highest performance required in demanding situations. MPPT stands for maximum power point tracking and Lento’s smart MPPT solar chargers play a crucial, central role in stand-alone and hybrid solar power installation. MPPT increases energy transfer efficiency by as much as 30% by calculating the maximum voltage available from the SPV modules at which maximum power is available for charging and sets the charging current accordingly. Output from SPV modules can vary considerably according to changing weather conditions and incorporation of MPPT means the charging conditions are always optimized by covering extra voltage to amperes and thus speeding up the charging process. Lento uses high-grade components to assure the best performance and extended life of the unit.
Available Variants:
1450 VA / 24 VDC
2100 VA / 24 VDC
3.5 KVA / 48 VDC
5 KVA / 48 VDC & 96 VDC
7.5KVA / 120 VDC
10 KVA / 192 VDC
Product Description
Salient Features
Technical Documentation
Lento’s smart MPPT Solar chargers also play a dual role. The MPPT microprocessor and DSP-based module constantly measures the load current on the battery and prevents deep discharge thereby extending battery life. In highly demanding SPV installations and where performance and efficiency are more critical, the best solution is a maximum power point tracking (MPPT) based solar charger. Unlike the simple PWM MOSFET charge controller, MPPT solar chargers employ sophisticated microprocessor-based circuitry with a wide number of variable presentable parameters and also automatic configuration. The end result is a gain in efficiency by 30%, better battery performance, and also enhanced battery life.
Lento Smart MPPT solar chargers are made of military-grade components and undergo severe tests to withstand any climatic conditions. Lento smart MPPT solar chargers are designed for unattended operation for remote solar power installations and there are options available to configure the charge voltage and current according to the type of battery in use. The intelligent microprocessor-based technology in MPPT solar chargers not only check for the type of battery but also constantly monitor its condition and adjust the charge accordingly. SPV modules are supposed to deliver 17 volts maximum but this is under optimum conditions and provided the glass surfaces are kept clean, which is not taken care of in remote conditions with the result that output voltage and the current falls drastically. Lento MPPS solar chargers automatically factor in the reduced input and adjust output to ensure that the charging of the battery and its state does not become affected.
In addition to these basic features, Lento MPPT solar chargers incorporate automation and protection features that assure users of increased power, better battery life, consistently reliable performance, and assured life.
SMK 63A SINGLE POLE AC BREAKER 230/400V
A range of 10x38mm fuse links specifically designed for protecting photovoltaic strings. These fuse links are capable of interrupting low overcurrents associated with faulted photovoltaic string arrays
(reverse current, multi-array fault)
Structural Characteristics
□ According to IEC60269-1
□ Rated current: 1-32A
□ Rated voltage: DC 1000V
□ Rated breaking capacity:DC 33kA
□ Operating class gPV for Solar protection
Specification
Pole 1P
Rated Voltage Ue (V DC) 1000
Rated Current In (A) 1, 2, 3, 4, 5, 6, 8, 10, 12,15, 20, 25, 32
Biggest Block Ability(KA) 33
The Most High Power Consumption(W) 3.5
1kva Solar Inverter Power Generator
access to lights, very good for – TV, 4 to 6 rooms light points, small standing fan 45 to 50watts or rechargeable fan, laptops, phones, sound system, electric clipper, etc.
This package is for low watts rate home or office appliances, You can upgrade this package with more battery and solar to increase the charging speed, and hour of use.
This package has an uninterrupted power supply (UPS), the power will not cut off when the city light is off during use.
The solar panel, battery, and inverter, shape height, color, brand, or look we are going to supply may be different from The image on the advert, But we are sending the rate, quality, and best quality mentioned in the descriptions below or above.
Sunlight is free, quickly take advantage.
Generate your own electricity from the sun.