Lento 3KVA 48V Pure Sine Wave Inverter
₦200,000
Lento offers next-generation smart MPPT based solar chargers for maximum efficiency and the highest performance required in demanding situations. MPPT stands for maximum power point tracking and Lento’s smart MPPT solar chargers play a crucial, central role in stand-alone and hybrid solar power installation. MPPT increases energy transfer efficiency by as much as 30% by calculating the maximum voltage available from the SPV modules at which maximum power is available for charging and sets the charging current accordingly. Output from SPV modules can vary considerably according to changing weather conditions and incorporation of MPPT means the charging conditions are always optimized by covering extra voltage to amperes and thus speeding up the charging process. Lento uses high-grade components to assure the best performance and extended life of the unit.
Available Variants:
1450 VA / 24 VDC
2100 VA / 24 VDC
3.5 KVA / 48 VDC
5 KVA / 48 VDC & 96 VDC
7.5KVA / 120 VDC
10 KVA / 192 VDC
Product Description
Salient Features
Technical Documentation
Lento’s smart MPPT Solar chargers also play a dual role. The MPPT microprocessor and DSP-based module constantly measures the load current on the battery and prevents deep discharge thereby extending battery life. In highly demanding SPV installations and where performance and efficiency are more critical, the best solution is a maximum power point tracking (MPPT) based solar charger. Unlike the simple PWM MOSFET charge controller, MPPT solar chargers employ sophisticated microprocessor-based circuitry with a wide number of variable presentable parameters and also automatic configuration. The end result is a gain in efficiency by 30%, better battery performance, and also enhanced battery life.
Lento Smart MPPT solar chargers are made of military-grade components and undergo severe tests to withstand any climatic conditions. Lento smart MPPT solar chargers are designed for unattended operation for remote solar power installations and there are options available to configure the charge voltage and current according to the type of battery in use. The intelligent microprocessor-based technology in MPPT solar chargers not only check for the type of battery but also constantly monitor its condition and adjust the charge accordingly. SPV modules are supposed to deliver 17 volts maximum but this is under optimum conditions and provided the glass surfaces are kept clean, which is not taken care of in remote conditions with the result that output voltage and the current falls drastically. Lento MPPS solar chargers automatically factor in the reduced input and adjust output to ensure that the charging of the battery and its state does not become affected.
In addition to these basic features, Lento MPPT solar chargers incorporate automation and protection features that assure users of increased power, better battery life, consistently reliable performance, and assured life.
Related products
-
Hybrid Inverter, Inverter
Bluegate 10kva-192v Inverter Online
0 out of 5(0)Blue Gate 10KVA with 192v Online inverter: Robust Capacity. BLUE GATE range of Inverters is an alternative power source where and when conventional utility power supply is either unreliable or unavailable. In locations where power supply from the electricity utility company is poor; individuals, homes, offices, schools, industries, etc can rely on power generated by the use of BLUE GATE Inverters. The BLUE GATE range of Inverters supply stable output power by converting DC (Direct Current) power into Pure Sine Wave AC (Alternating current) power. When input AC supply is interrupted unexpectedly the BLUE GATE Inverter automatically switches to Inverter mode and provide uninterrupted power. BLUEGATE Inverters have been designed with the end-user in mind to offer an Extremely Rugged and Reliable product that is eco-friendly, easy to maintain, offers a wide range of capacities to choose from for a more assured quality life style and of course produce clean energy. The BLUE GATE Inverters remain the best suitable choice for users who have low, medium and large energy consumption requirements. Whatever consumption capacity need you have, there is a BLUE GATE inverter right for you. Acquiring any capacity of the BLUE GATE INVERTER is therefore a sure way of having CONSTANT power generator that drastically reduces your fuel, diesel and repair costs. Product Details Application Small-Medium network, servers and other IT equipment Features 1. High frequency and double conversion online technology 2. Fully digitized microprocessor control 3. Wide input voltage range 4. LCD display 5. UPS start up without battery (for 1-3KVA) 6. Cold start 7. Advanced battery management 8. Automatic battery charging in UPS off mode 9. Lightning and surge protection 10. Short circuit and overload protection 11. Fan speed auto control when loads varies 13. Optional extension battery pack 14. Battery voltage display 15. Load capacity display 16. EMI/RFI noise filter 17. Smart RS232 communication with monitoring software 18. Optional SNMP card slot 19. EPO function (optiona 20. Parallel capacity
SKU: n/a -
Hybrid Inverter, Inverter
Blue Gate 1.5kva – 24V Solar Inverter
0 out of 5(0)BLUEGATE Hybrid Solar inverters are the latest in the range of innovative technologies that have further expanded the options of the usage of inverters. The BLUE GATE Hybrid Solar Inverter uses both energies from the sun and utility company/power generator to provide clean energy when the utility power source is down. The BLUE GATE Solar inverter is ideal to power appliances and equipment for homes, offices, industries/ critical infrastructure such as medical equipment, elevators, etc. To further complement the end-user’s lifestyle, it is interesting to let you know that the BLUE GATE Hybrid Solar Inverter is ideal for beach houses, country homes, construction sites, etc. that are not accessible to power supply from the utility company. So whether On-grid or Off-grid, the BLUE GATE Hybrid Solar Inverters provides a more reliable source of power supply for the end-users at all times. BLUE GATE Hybrid Solar Inverters are EXTREMELY RUGGED & RELIABLE to accommodate our different end-users lifestyles. They are suitable for various classes of users from homes, offices to large-scale industrial users. Models BGS1500 Power 1000W Battery Voltage 24Vdc Features Benefits to Users Compact & Wall Mounted The BGS1500, BGS2500, BGS3000 easily fit into any available space. Their lightweight design gives the wall-mounting capability, leaving you with enough ground space for battery connections. DSP Technology Digital Signal and Output time control technology LCD Indications for Battery Level & Load Levels with Bar Graph. Priority Intelligent Charging Smartly designed to know when and where to choose a sufficient source of power to charge the batteries. For example, if solar is sufficient to charge the battery, then no power is taken from the mains. However, if there is a deficit of solar power, then the remaining will be taken from the mains/grid supply. This same feature is functional in running electrical loads that are connected to the Inverter. Inbuilt Charge Controller Ensures that the right amount of voltage and current reach the battery to charge it efficiently. Also prevents the reverse flow of current from batteries to the panel during nighttime when the voltage of the battery is more than that of panel LCD/LED Display To monitor important information about the inverter performance – charging, battery level, system on/off, output level, etc. Pure Sine Wave Technology Ensures quality power delivery to keep your equipment safe Advanced Auto Sense Intelligent Control Offers boost for high performance Extended backup Gives users the flexibility to work and fun times 0ms – 5ms Typical Transfer Time Between Utility & Battery ● Connected loads are not restarted during changeover times Protective Edge ● 100% Protection for all Appliances (Rugged Technology) ● Overload with auto-reset function ● Battery deep discharge protection ● Overload and short circuit protection ● Over temperature protection Eco-friendly ● Noiseless in performance ● Pollution-free Advanced battery management ● which enhances battery life up to 70% ● Ensures faster battery charging Wide input voltage range ● Ensures High-Efficiency Warranty ● warranted for quality reliability for one year and above ● Swift after-sales service and supportSKU: n/a
Recently Viewed products
15kVA 96V 3 PHASE HDSX SERIES INVERTER
HDSX Inverter
15KVA – 50KVA
The HDSX series Inverter is packed with powerful features such as pure sine wave output, intelligent LCD integration display and an added fault query function, which makes its operation easy to monitor in real time.
The HDSX Series higher KVA solutions offer high quality and reliable power back-up solutions for running such loads, meeting such needs and handling such equipment
JORDY ELE 10KVA SERVO CENTRIAL STABILIZER 80V-280V

JORDY ELE 10KVA SERVO CENTRIAL STABILIZER 80V-280V
JORDY-ELE 10KVA Servo Central Stabilizer Stablize, Protect all electrical.
Low, High, Fluctuating NEPA Voltage?
One Central Stabilizer for your entire House, Flat or Office*.
Stablize and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
PC-SVS or Programmed Control Servo Voltage Stabilizer Series is based on digital technology. Due to special transformer servo technology, PC-SVS can handle inductive load such as air conditioners and take greater surges which offers more reliability and performance than traditional relay stabilizers. PC-SVS provides voltage stabilization and protection to appliances and equipment. PC-SVS is designed as a central stabilizer to handle all house loads.
POWERHUB 20KVA Voltage Stabiliizer
This Stabilizer is designed to regularize incoming NEPA/Generator voltage for all electrical and electronic appliances at homes, offices, medical & laboratory, ICT, and data centers.
SVS Stabilizer is a one size fit all device to address all electrical-related problems and it has these unique features as a comparative advantage over others, wide input voltage(80V-270V), ruggedness, and stability.
The SVS Technology is based on Servo Motor Control System plus Micro compute programmed control to prevent over or under voltage against home or office appliances connected with the Stabilizer.
Our 30 kVA voltage stabilizer static and servo-controlled solutions help your loads to have TV / Radio transmitter stations, GSM base stations, image and sound production studios, air – conditioners medical devices, hospitals, neon and laser illuminations, press and textile machines, photograph press machines, submerging pumps, ships, electric motors and all electrical devices sensitive to voltage changes.
1kva Solar Inverter Power Generator
access to lights, very good for – TV, 4 to 6 rooms light points, small standing fan 45 to 50watts or rechargeable fan, laptops, phones, sound system, electric clipper, etc.
This package is for low watts rate home or office appliances, You can upgrade this package with more battery and solar to increase the charging speed, and hour of use.
This package has an uninterrupted power supply (UPS), the power will not cut off when the city light is off during use.
The solar panel, battery, and inverter, shape height, color, brand, or look we are going to supply may be different from The image on the advert, But we are sending the rate, quality, and best quality mentioned in the descriptions below or above.
Sunlight is free, quickly take advantage.
Generate your own electricity from the sun.
DC Mini Circuit Breaker (Dc Mcb) -2P
FPV-63 DC MCB supplementary protectors are designed to provide overcurrent protection within appliances or electrical equipment, where a branch circuit protection is already provided or not required. Devices are designed for direct current (DC) control circuit applications.
Specifications
FPV-63 Series Circuit Breaker FPV-63
Frame Degree Rated Current (A) 63
Pole 2P
Rated Operating Voltage (V DC) DC12V -DC1200V Rated Current In (A) 1-63A
Rated Insulation Voltage Ui (V DC) 1200VDC Rated Impact Voltage Uimp (kV) 4
Ultimate Breaking Capacity Icu (kA) 6
Run Breaking Capacity LCS (%lcu) 75% Curve Type C
Trip Type Thermal-magnetic
30A 12V/24V/48V Kartel solar charge controller MPPT
Features
Intelligent battery management function, extend battery life
Wide PV input voltage range, convenient for system configuration.
Multiple working modes to adapt different working occasion.
Advanced MPPT tracking, 99% tracking efficiency
3.5KVA 3.5kW 24V Transformerless Hybrid Inverter with inbuilt 100A MPPT solar charger controller

3.5KVA 3.5kW 24V Transformerless Hybrid Inverter with inbuilt 100A MPPT solar charger controller
Features:
Input Voltage: 500Vdc Max
Output Voltage: 220V/230V; 110V/120V
Output Current: 60a
Output Frequency: 50/60hz
Output Type: Single, Triple
Size: 448*295*105
Type: DC/AC Inverters
Inverter Efficiency: 97%
Certificate: CE&EMC
Weight: 11KG
Solar charge controller: Built in 80A-100A MPPT
Power Factor: 1.0 (not 0.8)
Efficiency: over 93%
Waveform: Pure sine wave
Parallel operation: HHP-48 supports from 9/12 units
PV voltage range: 120-450VDC
Communication ways: USB/RS232/Dry contact
Monitoring ways: optional for NB-IOT/GPRS/WIFI
Operation Phase: Single phase (HHP48 supports 3 phase)