SMK 4kva 800V 2 pole DC surge protective device
₦10,000 ₦12,000
A surge protector contains metal oxide varistor, or MOV, which diverts any extra voltage to ensure devices receive a consistent power level. The MOV works like a pressure-sensitive valve. When the MOV detects high voltage levels, it reduces resistance. If voltage levels are too low, it increases resistance
Related products
-
Solar Products, Solar street light
YINGLI 60W LED INTEGRATED SOLAR STREET LIGHTS
0 out of 5(0)The Yingli Solar Street Light is an affordable solution to illuminating dark areas for buildings, parks, streets, alleys, compounds, resorts, and more. the Yingli Solar Street Light gets its power from the solar panel attached to it to illuminate a bright light. It also comes with a long-lasting battery with an intelligent exclusive controller used to store excess power for use during nighttime. The Yingli Solar Street Light’s charge controller can be programmed to light and turn off at certain hours.
Yingli’s Solar Street Light can work continuously for hours daily depends on the Watt. The Yingli Solar Street Light stands at 5 meters tall and is made up of high-quality steel painted with a milky white color and smoothened to perfection.
SKU: n/a
Recently Viewed products
SMK 4kva 800V 2 pole DC surge protective device

SMK 4kva 800V 2 pole DC surge protective device
A surge protector contains metal oxide varistor, or MOV, which diverts any extra voltage to ensure devices receive a consistent power level. The MOV works like a pressure-sensitive valve. When the MOV detects high voltage levels, it reduces resistance. If voltage levels are too low, it increases resistance
Lento Inverter 2.1KVA 24V Pure Sine Wave
Lento offers next generation smart MPPT based solar chargers for maximum efficiency and highest performance required in demanding situation. MPPT stands for maximum power point tracking and Lento’s smart MPPT solar chargers play a crucial, central role in stand alone and hybrid solar power installation. MPPT increases energy transfer efficiency by as much as 30% by calculating maximum voltage available from the SPV modules at which maximum power is available for charging and sets the charging current accordingly. Output from SPV modules can vary considerably according to changing weather conditions and incorporation of MPPT means the charging conditions are always optimized by covering extra voltage to amperes and thus speeding up the charging process. Lento uses high grade components to assure best performance and extended life of the unit.
Available Variants:
1450 VA / 24 VDC
2100 VA / 24 VDC
3.5 KVA / 48 VDC
5 KVA / 48 VDC & 96 VDC
7.5KVA / 120 VDC
10 KVA / 192 VDC
Product Description
Salient Features
Technical Documentation
Lento’s smart MPPT Solar chargers also play a dual role. The MPPT microprocessor and DSP based module constantly measures the load current on the battery and prevents deep discharge thereby extending battery life. In highly demanding SPV installations and where performance and efficiency are more critical the best solution is a maximum power point tracking (MPPT) based solar charger. Unlike the simple PWM MOSFET charge controller, MPPT solar chargers employ sophisticated microprocessor based circuitry with a wide number of variable presentable parameters and also automatic configuration. The end result is gain in efficiency by 30%, better battery performance and also enhanced battery life.
Lento Smart MPPT solar chargers are made of military grade components and undergo severe tests to withstand any climatic conditions. Lento smart MPPT solar chargers are designed for unattended operation for remote solar power installations and there are options available to configure the charge voltage and current according to the type of battery in use. The intelligent microprocessor based technology in MPPT solar chargers not only check for type of battery but also constantly monitor its condition and adjust charge accordingly. SPV modules are supposed to deliver 17 volts maximum but this is under optimum conditions and provided the glass surfaces are kept clean, which is not taken care of in remote conditions with the result that output voltage and current falls drastically. Lento MPPS solar chargers automatically factor in the reduced input and adjust output to ensure that charging of the battery and its state does not become affected.
In addition to the these basic features, Lento MPPT solar chargers incorporate automation and protection features that assure users of increased power, better battery life, consistently reliable performance and assured life.
Submersible DC Solar Water Pump + Inbuilt Controller
Submersible DC solar water pump is designed as DC brush motor driving pump impellers, by connecting to solar panels directly. The power from solar panels can drive this pump. This type of pump is mostly used in areas, where lack of electricity or strict requirement for environmental protection. DC solar pump is suitable to pump and drainage water, which doesn’t need a controller. Moreover, the installation is very simple. This type of pump is mainly used in homes, institutions, fields of power plants, steel mills, mining, chemical, fire, water plants, agricultural irrigation, and other industries. Specifications: Voltage: 24/36volts Power: 250watts Max flow: 2(M3/h) Max head: 25m Outlet: 1” Solar Panel capacity: 250/300watts – (24volt). Battery Capacity: 24volt Free installation Cable: 20m. Higher capacities are available on request.
15kVA Relay stabilizer (45v-280v)
Description
Overview
Low, High, Fluctuating NEPA Voltage?
One Central Stabilizer for your entire Flat, Home, Office, etc.
Input Voltage Range of 45V-280V
Stablize and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
TM45-15K Relay Automatic Voltage Stabilizer Series is based on digital technology; provides voltage stabilization and protection to appliances and equipment; designed as a central stabilizer to handle all house loads.
Features
Applications
100W All in one solar street light with camera
100w All In One Solar Street Light Outdoor For Smart City Public Lighting
MAX 48V 10kWH Lithium ion Battery
Application : •All Purpose •Alarm & Security Signal •Uninterruptable Power Supply (UPS) •Electronic apparatus & Equipment •Electrical Power Supply (EPS) •Communication power supply •Emergency Backup Power •DC power supply •Emergency Light •Auto control system
100A/192V Kartel solar charge controller MPPT
Features
Intelligent battery management function, extend battery life
Wide PV input voltage range, convenient for system configuration.
Multiple working modes to adapt different working occasion.
Advanced MPPT tracking, 99% tracking efficiency
30kVA/192V 3 PHASE HDSX SERIES INVERTER
HDSX Inverter
15KVA – 50KVA
The HDSX series Inverter is packed with powerful features such as pure sine wave output, intelligent LCD integration display and an added fault query function, which makes its operation easy to monitor in real time.
The HDSX Series higher KVA solutions offer high quality and reliable power back-up solutions for running such loads, meeting such needs and handling such equipment