SMK 63A SINGLE POLE AC BREAKER 230/400V
₦1,000 ₦1,500
A range of 10x38mm fuse links specifically designed for protecting photovoltaic strings. These fuse links are capable of interrupting low overcurrents associated with faulted photovoltaic string arrays
(reverse current, multi-array fault)
Structural Characteristics
□ According to IEC60269-1
□ Rated current: 1-32A
□ Rated voltage: DC 1000V
□ Rated breaking capacity:DC 33kA
□ Operating class gPV for Solar protection
Specification
Pole 1P
Rated Voltage Ue (V DC) 1000
Rated Current In (A) 1, 2, 3, 4, 5, 6, 8, 10, 12,15, 20, 25, 32
Biggest Block Ability(KA) 33
The Most High Power Consumption(W) 3.5
Related products
-
MC4 connector, Solar Installation Accessories
2 in 1 MC4 Connectors for Panels Connection, 30 amps, Male, Female Pair
MC4 connector, Solar Installation Accessories2 in 1 MC4 Connectors for Panels Connection, 30 amps, Male, Female Pair
0 out of 5(0)Loom Solar Introduces 2 In 1 MC4 Connector for connecting solar panels.
- rated Voltage: 1500 volt, 30 amps
- suitable cable : 2.5 ~ 6.0 square mm
- TUV certified, IP 67. UV Protected
SKU: n/a -
MC4 connector, Solar Installation Accessories
10 Pairs MC4 Connector With Better Waterproof Effect
0 out of 5(0)Solar mc4 connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. For permanent installations. Specifications: rated voltage: tuv 1000v dc / ul 600v dc rating current 20a~25a suitable cable cross sections 2.5mm2~6.0mm2 / 14awg~10awg pin dimension: 4.0mm proof voltage: dc 8kv(1min) pollution: degree 2 protection class: class ii contact material: copper, tin-plated contact resistance: 5mw connector material: ppo degree of protection ip: ip67(iec 60529) withdrawal force< 50n insertion force>50n temperature range: -40°c~+85°c flame class: ul94-v0 package: 10 pairs of mc4 male/female solar panel cable connectors 10 pairs of solar connector pins (male &female)SKU: n/a
Recently Viewed products
Zektron 6kva Online UPS TS11 Series
Zektron online UPS TS-11 series adopts online double conversion design and digital control technology and it features high input and output power factor (0.9). With ECO mode for energy-saving, intelligent battery management and excellent network management, it is a cost-effective power solution for your critical devices. When UPS is on battery mode, it can shut down unnecessary load and extend the backup time of the critical load.
Pure Sinewave Inverter 1.5kva Solar Hybrid
1, On-line ups, 12v input.
2, Pure sine wave.
3, Solar hybrid charger up to 50A.
4, Inbuilt high efficient charger up to 28A,charging power input range 155v-265v.
5, Automatic cut off when fully charged 3 stages charging to maximize the protection.
6, Fully & intelligently protected (Out put short circuit, over load, in put high or low voltage,lack voltage alarm, anti polar, high temperature, etc)
Note: if you donot have electricity but only have solar panel to charge, you should always keep the switch on for the solar pannel current to come in. In case of cutting all the supply off, you can use the circuit breakers at the back to do so.