Zektron online UPS TS-11 series adopts online double conversion design and digital control technology and it features high input and output power factor (0.9). With ECO mode for energy-saving, intelligent battery management and excellent network management, it is a cost-effective power solution for your critical devices. When UPS is on battery mode, it can shut down unnecessary load and extend the backup time of the critical load.
Related products
-
UPS
Mercury ELITE PRO 1000VA UPS
0 out of 5(0)Mercury ELITE1000 PROELITE1000 PRO
​When it comes to power solutions, you can rest assured when you use Mercury UPS. Mercury offers you a wide range of configurations. No matter you are a home user or you are looking for a corporate solution, you can rely on Mercury UPS.Features:
- Output Short Circuit Protection
- Intelligent Battery Management
- Over Temperature Protection
- Wide Range Of Input Voltage
- Overload Protection
- Auto Restart
- Dataline Protection
- Surge Protection
- DC Start
Specifications:
- Input Voltage 220VAC
- Input Frequency 50Hz
- Input Phase Single Phase
- Input Socket with FUSE
- Cold Start (0~100% load)
- Press the ON / OFF Switch
- Input Range (220V) 140V~285V
- Normal Frequency 50Hz
- Rating Output (VA) 1000VA
- Rating Output (W) 600W
- Waveform Battery Mode (Simulated Sine Wave)AC Mode (Sine Wave)
- Power Factor 0.6
- Rating Voltage 220V
- Output Range 220VAC +17~22%(No Load Connected)
- Rear Output Socket 3x IEC – Battery Backup
- Transfer Time Typical 8ms (max 15ms)
- Short Circuit Protection Line
- Mode FUSE & Software Protection 100%~120% (gives alarm & shut down in 3min)120%~130% (beeps alarm & shut down in 30s)>130% (shut down immediately)
- Battery Mode Software Protection controlled by CPU100%~110% (gives alarm & shut down in 10s)>110% (shut down immediately)
- Battery & Runtime Rating 12V / 9AH x1
- Battery & Runtime Backup Time Typical 8mins~20mins
- Battery & Runtime Change Current 1.5A (max)
- Battery & Runtime Over Charge >14.8V ±0.5 (Stop Charging)
- Battery & Runtime Protection
SKU: n/a -
UPS
Maxtron UPS – 650VA
0 out of 5(0)Maxtron UPS possesses Boost and Trim Automatic Voltage Regulation (AVR). It gives higher application availability by correcting low and high voltage conditions without using the battery. Intelligent battery management, maximizes battery performance, life, and reliability through intelligent, precision charging.
SKU: n/a
Recently Viewed products
5kVA 48v Inverter ISH series
Zektron ISH series is a pure sine wave inverter with fully digital microprocessor control and a wider input voltage, this inverter is compatible with generators. With its transformer design, it can provide more protection to the load which is under unstable power condition.
JORDY ELE 50KVA Servo 3phase Central Industrial Stabilizer

JORDY ELE 50KVA Servo 3phase Central Industrial Stabilizer
Low, High, Fluctuating NEPA Voltage? Now you can get your mind to rest with this heavy-duty low-cost high grade and high power Servo motorized Industrial stabilizer.
One Central Stabilizer for your entire Flat, Home, Office, etc.
Input Voltage (160V-450V)
Stabilize and Protect all electrical appliances in your premises: Air Conditioners, Fridges, Freezers, TV, Home Theatre, DVD, Satellite Decoder, Electronics, Lights, Fans, Washing Machine, Microwave, Pumping Machine, Photocopier, Printer, Desktops, Notebooks, etc.
PT-50kva Servo Automatic Voltage Stabilizer Series is based on digital technology; provides voltage stabilization and protection to appliances and equipment; designed as a central stabilizer to handle all house and industrial loads. \no need to worry about brownouts, burn outs and ertic power anymore.
Input voltage: 160V-460V AC
Power: 50KVA
Technology: Servo Control + Toroidal Transformer System
Efficiency: > 97%
Display: LED Digital Display
Frequency: 50Hz/60Hz
Delay Time: Short Delay (3-5 sec)
Over-voltage protection: AC246 ± 4V
High Temperature
Short Circuit
Output voltage: 380V ± 10%
Phase: Three
Zektron 3kva Online UPS TS11 Series
Zektron online UPS TS-11 series adopts online double conversion design and digital control technology and it features high input and output power factor (0.9). With ECO mode for energy-saving, intelligent battery management and excellent network management, it is a cost-effective power solution for your critical devices. When UPS is on battery mode, it can shut down unnecessary load and extend the backup time of the critical load.
60A/12V/24V/48V Kartel solar charge controller MPPT
Features
Intelligent battery management function, extend battery life
Wide PV input voltage range, convenient for system configuration.
Multiple working modes to adapt different working occasion.
Advanced MPPT tracking, 99% tracking efficiency
Felicity Solar 750VA 12V Pure sine wave Inverter
Solar inverter, or converter, or PV inverter converts the variable DC output of a photovoltaic (PV) solar panel into a utility frequency alternating current (AC) that can be off-grid electrical network. It is a critical balance of system–component in a solar power system, allowing the use of ordinary AC-powered equipment.
100A MPPT Solar Charger controller (12V- 48V)

100A MPPT Solar Charger controller (12V- 48V)
12V/24V36/48V Auto work,parallel design
Multi-stage charging optimizes battery performance
MPPT eficiency >99.5%, Peak conversion efficiency 97.5%
Compatible with Gel. AGM.Flooded. Sealed lead acid and Lithium battery
Comprehensive protection
Heatsink cooling, quiet operation
Comfortable installation and commissioning
Monitoring your solar harvest on line via RS485 communition, Ethernet/RS232 communication Optional
SMK 4kva 800V 2 pole DC surge protective device

SMK 4kva 800V 2 pole DC surge protective device
A surge protector contains metal oxide varistor, or MOV, which diverts any extra voltage to ensure devices receive a consistent power level. The MOV works like a pressure-sensitive valve. When the MOV detects high voltage levels, it reduces resistance. If voltage levels are too low, it increases resistance
Zektron online UPS TS-11 series adopts online double conversion design and digital control technology and it features high input and output power factor (0.9). With ECO mode for energy-saving, intelligent battery management and excellent network management, it is a cost-effective power solution for your critical devices. When UPS is on battery mode, it can shut down unnecessary load and extend the backup time of the critical load.
Features :
- Wide input voltage range:110~300Vac.
- Online double conversion with full digital control.
- Selectable output voltage: 208/220/230/240Vac.
- Intelligent charging management, effectively improving the life time of battery
- Multiple protection function:short-circuit,overload,overheat, battery overcharge and overdischarge,output low voltage and fan fault alarm
- Parallel up to 4 units 12a charger for option, charging for large capacity batteries