Zektron online UPS TS-11 series adopts online double conversion design and digital control technology and it features high input and output power factor (0.9). With ECO mode for energy-saving, intelligent battery management and excellent network management, it is a cost-effective power solution for your critical devices. When UPS is on battery mode, it can shut down unnecessary load and extend the backup time of the critical load.
APC Smart-UPS SRT 6000VA 230V – SRT6KXLI
₦1,204,500
Specification:
- Output Power Capacity: 2700 Watts / 3000 VA
- Max Configurable Power: 2700 Watts / 3000 VA
- Nominal Output Voltage: 230V
- Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
- Efficiency at Full Load: 95.0%
- Output Voltage Distortion: Less than 5% at full load
- Output Frequency (sync to mains): 47 – 53 Hz for 50 Hz nominal, 57 – 63 Hz for 60 Hz nominal
- Topology: Line Interactive
- Waveform Type: Sine wave
- Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Typical recharge time: 3 hour(s)
- Replacement Battery: RBC55
Related products
-
UPS
Eaton 5E Series 1500VA UPS
0 out of 5(0)Eaton 5E 1500VA USB 230V GeneralTopologyLine Interactive with Automatic Voltage RegulationConfigurationTowerStyle Number5E1500iUSBPart Number5E1500iUSBRating (VA/Watts)1500VA/900WDimensions (H x W x D, mm)330 x 180 x 133Weight (kg)10.46Warranty2 years Electrical InputConnection(1) IEC-320-C14
Input Voltage Range170-280VNominal Voltage230 VOperating Frequency50/60Hz Electrical OutputNominal Voltage230VOutlets(6) IEC-320-C13
BatteryBattery ManagementPermanent battery recharge, cold start CommunicationsCommunication Ports1 USB portPower Management SoftwareEaton UPS Companion software Environmental & StandardsAudible Noise
Related
SKU: n/a -
UPS
Blue Gate 6KVA Online UPS, Hfi BG6KVA
0 out of 5(0)The Blue Gate 6kva Online UPS with a power output capacity of 4.2kW is a robust capacity to meet office power backup requirements. It’s suitable for IT equipment, in particular servers, workstations, and network devices. Use the Blue Gate 6kva Online UPS to support mission-critical equipment, ensuring extended power backup and protection of equipment. Online UPS offers zero switchover time from the mains supply to UPS supply mode, meaning that continuous power supply is available to the equipment. Online UPS, unlike line-interactive UPS which runs in “offline” mode when there’s mains supply (thus not supplying from its battery), is always supplying from its battery bank, thus ensuring there’s no break with can affect sensitive equipment. The Online UPS is therefore a safer UPs option. Blue Gate 6KVA/4200W Online UPS HF Series – BGK 6.0HFi, offers seamless power backup, with zero transfer performance. The Blue Gate Online UPS range has zero switching time, making them ideal for sensitive equipment like servers, networking devices, and similar equipment that will not tolerate any power switchover time. The Blue Gate 6KVA Online UPS boasts an advanced UPS design, with a central processing system. It is equipped with advanced voltage compensation technology, advanced frequency technology, and advanced PFC technology. You get undistorted standard sine wave from a wide range of input variables, as a result. The Blue Gate 6KVA Online UPS offers a 4200W power output capacity. The voltage input range is 115±5VAC – 295±5VAC when the load is less than 70% and 160±5VAC – 295±55VAC when it’s above 70%. Similarly, the frequency range is 46 – 54Hz±0.5Hz or 56 – 64Hz±0.5Hz auto-sensing. It is a single-phase UPS, with a pure sine wave waveform. Features of Blue Gate 6KVA/4200W Online UPS Check these key features of the Blue Gate HF Series UPS: Good for IT equipment: network, servers, etc High frequency, and double conversion online technology Fully digitized microprocessor control Wide input voltage range LCD display UPS start-up without battery; Cold start Advanced battery management Automatic battery charging in UPS off mode Lightning and surge protection Short circuit and overload protection Fan speed auto control when loads vary Network/fax/modem surge protection Optional extension battery pack Battery voltage display Load capacity display EMI/RFI noise filter Smart RS232 communication with monitoring software
SKU: n/a
Recently Viewed products
APC Smart-UPS SRT 6000VA 230V – SRT6KXLI
Specification:
2 in 1 MC4 Connectors for Panels Connection, 30 amps, Male, Female Pair

2 in 1 MC4 Connectors for Panels Connection, 30 amps, Male, Female Pair
Loom Solar Introduces 2 In 1 MC4 Connector for connecting solar panels.
APC Smart-UPS SRT is a family of high-density, performance UPSs for voice and data networks, medical labs, and light industrial applications. Capable of supporting 10kVA in a 6U rack/tower convertible form, users can support power hungry blade servers or heavily loaded equipment racks. This flexible form factor allows standardization across multiple applications. High power internal chargers allow virtually unlimited additional matching battery packs to comply with aggressive runtime demands of business-critical systems. Customers with harsh power environments looking for extremely tight voltage and frequency regulation, internal bypass, and input power factor correction typical of double conversion online topology will get them in the Smart-UPS RT.
Specification:
- Max Configurable Power: 6000 Watts / 6000 VA
- Nominal Output Voltage: 230V
- Output Voltage Distortion: Less than 2%
- Output Frequency (sync to mains): 50/60Hz /- 3 Hz
- Other Output Voltages: 220, 240
- Crest Factor: 3 : 1
- Topology: Double Conversion Online
- Waveform Type: Sine wave
- Nominal Input Voltage: 230V
- Input Frequency: 40 – 70 Hz (auto sensing)
- Input Connections: Hard Wire 3 wire (1PH N G)
- Input voltage range for main operations: 160 – 275V
- Control panel: Multi-function LCD status and control console
- Audible Alarm: Audible and visible alarms prioritized by severity
- Emergency Power Off (EPO): Yes